CarTechnoloGY

Full Version: CANCLIP interface fix and repair !
You're currently viewing a stripped down version of our content. View the full version with proper formatting.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18
(08-07-2014, 23:34 PM)p.wisniewski90 Wrote: [ -> ]For 20% firmware update error we can fix by removing 3 files:

C: \ ASDE \ Modules \ APPLIISO.S19
C: \ CLIP \ DATA \ APPLI \ PARAMETRY \ APPLIISO.S19
C: \ CLIP \ DATA \ APPLI \ PARAMETRY \ APPLICAN.S19

It's not really a fix, it is "old dirty trick" and just "mask" problem with firmware update. hiddentmi

Please try your fix with real car attached to CLIP, and some new type of RENAULT cars, you'll find that you WILL GET NO CONNECTION, even with fix from above.
worried


Regards! drive

p.wisniewski90

I forget to add this. It's only software fix, no hardware wink

lnv

Hi, guys. I have the same problem as ssashton written about. Link break of about 10 or sometimes less minutes. The relay is clicked and link is broken. Then it can click again (or not) and link is OK again (or not). What can cause such a behaviour? Any thoughts?

mradu2005

I found cypress AN2135CS faulty green light no light iso pcb As I found it defective? I measured oscillator oscilloscope integrated near and I saw no oscillations will keep the currents...
I have an Renault clip RLT2002 with problem no green leds light
in device manager is unknown device
please help

Raptor181

(20-08-2014, 19:53 PM)nicu_cuc Wrote: [ -> ]I have an Renault clip RLT2002 with problem no green leds light
in device manager is unknown device
please help

Change quartz, flash. nod
What quartz????????
regard
(20-08-2014, 20:25 PM)nicu_cuc Wrote: [ -> ]What quartz????????
regard

Hi G.A guy,

Green led is OFF on two electronic boards ISO and CAN ????

Replace quartz 32.768 KHz, here (on CAN electronic board):

[Image: 20140810.jpg]

Do the same on iso board if the LED does not light ... and tell us the result!
Regards.
Both green led are off
this clip works for tow years and at once when test one car it stop working and both green led are off an in device manager is unknow device
(21-08-2014, 13:07 PM)nicu_cuc Wrote: [ -> ]Both green led are off
this clip works for tow years and at once when test one car it stop working and both green led are off an in device manager is unknow device

And here for ISO electronic board:

[Image: img_2010.jpg]

Regards.
Pages: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18