Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 (/showthread.php?tid=22484) |
RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - Thinkpad - 17-03-2017 (12-03-2017, 11:03 AM)georgia55 Wrote: I have tried today an F 01 with ISTA-D to program (with full PsdZdaten), but unfortunately comes error: vehicle please identify first, although I have vehicle read out and error cleared. Hi, I also cannot program F series. Getting message "Please perform vehicle test first" Any solution for this? RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - dachCAR - 19-03-2017 Hello, you can not download the link ISTA / P 3.6 RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - Loliceman - 19-03-2017 (17-03-2017, 14:52 PM)Thinkpad Wrote:(12-03-2017, 11:03 AM)georgia55 Wrote: I have tried today an F 01 with ISTA-D to program (with full PsdZdaten), but unfortunately comes error: vehicle please identify first, although I have vehicle read out and error cleared. You NEED to use ICOM to be able to program through ISTA Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - Thinkpad - 19-03-2017 (19-03-2017, 07:11 AM)Loliceman Wrote:(17-03-2017, 14:52 PM)Thinkpad Wrote:(12-03-2017, 11:03 AM)georgia55 Wrote: I have tried today an F 01 with ISTA-D to program (with full PsdZdaten), but unfortunately comes error: vehicle please identify first, although I have vehicle read out and error cleared. I am using ICOM clone with latest firmware RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - Thinkpad - 19-03-2017 Hi, I have troubles with connecting with F series with ISTA/P via ICOM. ISTA+, ISTA D, NCS expert, Winkfp works without problems. After retrieving VIN and model designation, ISTA P throws CASTOR error 63014. I updated ICOM with new firmware, checked all settings but cannot get connection. I also tried with another computer with older ISTA P version but same problem. Here I post my setup, if anyone has a clue what might be wrong.. I can flash E series without problems with mine ICOM, flashed a lot of cars in past. I think there must be some problem with connecting to car "Ethernet" port. I also turned off firewall on PC, removed car battery, done Flex ray initialization with ISTA+, so I am out of ideas. I want to program this car to code used EPS module. RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - spider80 - 24-03-2017 (12-03-2017, 14:49 PM)Blackline Wrote: Will you be uploading a new package with ISTA 4.04.20 and ISTA/P 3.61.1? No. Only when ISTA 4.05 will be releasd. RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - dkoumentos - 24-03-2017 Thanks spider80 for sharing this upload. Is anyone there by any chance having Greek language for this ista_d version? RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - hugoboss25 - 29-03-2017 Hello everybody ! Can you explain me what is FASTA & HW check ? Thanks ! RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - Hermi - 03-04-2017 Faq is password protected RE: Rheingold 4.04.12 Standalone / SDP 4.04.11 / ISTA-P 3.61.0.500 Torrent - vcm2remote - 03-04-2017 (19-03-2017, 09:32 AM)Thinkpad Wrote: Hi,bad copy ıcom..not soetware problem.. change and use orıgınal and best cıopy ıcom .. ıf u want f serıes programıng and readıng fault code.. not thats problem 2012 after best regards by kenwood |