+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: SSS Progman how to unlock Mini (/showthread.php?tid=49919)
Pages:
1
2
RE: SSS Progman how to unlock Mini - Pawel M - 25-04-2019
(24-04-2019, 21:22 PM)bmwcoder75 Wrote: Did you swap the chip from the old to the new BDC module cause you won't be able to encode the ECU if not done already.
I have swapped Body Control Module as old one got faulty and create issues with lights. New one works fine however new unit needs coding as sunroof does not work. Problem I have is that only INPA reads vehicle and only engine ECU there is 'NO RESPONSE FROM UNIT' message on rest. ISTA D couldnt see the car either.
I have read about syncing EWS with ECU in SSS Progman but I cannot unlock MINI as VMare does not allow me to map the drive where file is which needs changing settings.
We talking about old BMW MINI 2001 r50
RE: SSS Progman how to unlock Mini - ____ANGEL___ - 25-04-2019
is your cable a K+Dcan?
RE: SSS Progman how to unlock Mini - Pawel M - 25-04-2019
(25-04-2019, 12:55 PM)____ANGEL___ Wrote: is your cable a K+Dcan?
yes it is
no luck with ZSC numbers either,
RE: SSS Progman how to unlock Mini - ____ANGEL___ - 28-04-2019
Use ncsexpert to code. Zke or gm5 or BC1 module. If coding fails use sg_codieren_ohne_fg
RE: SSS Progman how to unlock Mini - Enabled - 01-05-2019
(25-04-2019, 07:28 AM)Pawel M Wrote:(24-04-2019, 21:22 PM)bmwcoder75 Wrote: Did you swap the chip from the old to the new BDC module cause you won't be able to encode the ECU if not done already.
I have swapped Body Control Module as old one got faulty and create issues with lights. New one works fine however new unit needs coding as sunroof does not work. Problem I have is that only INPA reads vehicle and only engine ECU there is 'NO RESPONSE FROM UNIT' message on rest. ISTA D couldnt see the car either.
I have read about syncing EWS with ECU in SSS Progman but I cannot unlock MINI as VMare does not allow me to map the drive where file is which needs changing settings.
We talking about old BMW MINI 2001 r50
You need to bridge pins 7&8 of k+dcan. This sounds like a connection problem.
If you can't connect with INPA, SSS Progman and ISTA will not connect. They all use the same framework.