Rear View Camera retrofit (F20) - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Rear View Camera retrofit (F20) (/showthread.php?tid=49974) |
RE: Rear View Camera retrofit (F20) - hugo325 - 27-04-2019 Someone has a procedure for removal of the trunk trim for F20 ? I found a good picture to place the cable between the camera and the TRSVC module : I saw on a diagram that the bus K_CAN_H/L can be connected on the module "X382*1B". You think it's possible to do that? Of course for this to work it is necessary that the bus K_CAN is also connected between the module "X382*1B" and "FEM". I saw the information here: https://www.newtis.info/tisv2/a/en/f20-118d-sha/wiring-functional-info/functional-wiring-diagrams/04-driver-assistance/all-round-vision-camera/1VnYSd3rUi RE: Rear View Camera retrofit (F20) - simonchs - 28-04-2019 (27-04-2019, 19:05 PM)hugo325 Wrote: Someone has a procedure for removal of the trunk trim for F20 ? You can find this in newtis as well. https://www.newtis.info/tisv2/a/en/f20-118d-sha/repair-manuals/66-distance-system-cruise-control-remote-operation/66-53-reversing-camera-rfk-side-view-camera-top-view-camera/HO7y0U6k Follow the "Necessary preliminary tasks" RE: Rear View Camera retrofit (F20) - hugo325 - 28-04-2019 Ok thank you simonchs, I just realized that I do not have support in red: Do you have a reference for this type of part ? RE: Rear View Camera retrofit (F20) - simonchs - 28-04-2019 Yeah it's in "65 Audio, Navigation, Electronic Systems" catalogue in ETK. RE: Rear View Camera retrofit (F20) - hugo325 - 28-04-2019 Yes I just found the information thank you. RE: Rear View Camera retrofit (F20) - hugo325 - 04-05-2019 Hello everyone, Yesterday I managed to install the cable between the module TRSVC and the camera. I disassembled the rear lights and the rear bumper to drill a hole with a hole saw. I made a location for the camera to pass. I also connected the power cable (+ 12V) in the fusebox (pin 6 of plug Z2 * 6B : F154). Next Monday I look for the cables "FBAS" and "K_CAN". Here are the photos : RE: Rear View Camera retrofit (F20) - Wibbles - 04-05-2019 Nice work! Cutting the bumper is never much fun. RE: Rear View Camera retrofit (F20) - simonchs - 04-05-2019 Ar.... the hole for rear view camera should be "square" instead of "circle" RE: Rear View Camera retrofit (F20) - hugo325 - 06-05-2019 Yes, I first drilled a round hole, then filed down to make a square. I needed only to disassemble the left wheel to drill and run the cable. I save time ^^ RE: Rear View Camera retrofit (F20) - emhtuning - 06-05-2019 (04-05-2019, 19:48 PM)simonchs Wrote: Ar.... the hole for rear view camera should be "square" instead of "circle" good work , I am interested to see the picture angle , I love F20 but one of the reasons preventing me of buying one is rear view camera , OEM is placed in the middle of the bumper between the PDC's . installing camera are the number plate i believe will give you more angle to the ground and the near car behind . please post some pictures of the screen once the camera is ready and active . |