+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Solved ✔ BMW X5 2004 DASH PINOUT (/showthread.php?tid=55553)
Pages:
1
2
RE: BMW X5 2004 DASH PINOUT - Moldovan1 - 29-08-2019
(29-08-2019, 17:11 PM)Ecutech Wrote: Thank you Moldovan1, i have managed to read dump. It was 35080. Will transfer to new cluster tomorrow. Thank you Volavka for your help too.I'm very interested if you Xprog can erase mileage on old dash, MY2004. Can you try? In any case you have already backup
))
RE: BMW X5 2004 DASH PINOUT - Ecutech - 29-08-2019
(29-08-2019, 19:31 PM)Moldovan1 Wrote:(29-08-2019, 17:11 PM)Ecutech Wrote: Thank you Moldovan1, i have managed to read dump. It was 35080. Will transfer to new cluster tomorrow. Thank you Volavka for your help too.I'm very interested if you Xprog can erase mileage on old dash, MY2004. Can you try? In any case you have already backup
You mean erase old cluster eeprom with xprog?
RE: BMW X5 2004 DASH PINOUT - Moldovan1 - 29-08-2019
(29-08-2019, 19:39 PM)Ecutech Wrote:Yes!(29-08-2019, 19:31 PM)Moldovan1 Wrote:(29-08-2019, 17:11 PM)Ecutech Wrote: Thank you Moldovan1, i have managed to read dump. It was 35080. Will transfer to new cluster tomorrow. Thank you Volavka for your help too.I'm very interested if you Xprog can erase mileage on old dash, MY2004. Can you try? In any case you have already backup
You mean erase old cluster eeprom with xprog?
RE: BMW X5 2004 DASH PINOUT - Ecutech - 29-08-2019
(29-08-2019, 20:39 PM)Moldovan1 Wrote:Will give it a go tomorrow. If not then i wont be able to write old dump to new cluster will i.(29-08-2019, 19:39 PM)Ecutech Wrote:Yes!(29-08-2019, 19:31 PM)Moldovan1 Wrote:(29-08-2019, 17:11 PM)Ecutech Wrote: Thank you Moldovan1, i have managed to read dump. It was 35080. Will transfer to new cluster tomorrow. Thank you Volavka for your help too.I'm very interested if you Xprog can erase mileage on old dash, MY2004. Can you try? In any case you have already backup
You mean erase old cluster eeprom with xprog?
RE: BMW X5 2004 DASH PINOUT - Moldovan1 - 30-08-2019
If mileage from old dump is more than in new - no problem. Great Interest if Xprog can erase mileage from dash, MY from 2004. Because in this year the manufacturer switched from panels with 35080 inside to 35080v6 (which Xprog can not erase, at least my Xprog 5.51).
RE: BMW X5 2004 DASH PINOUT - Ecutech - 30-08-2019
Build date for this x5 is 25/06/2004. I can confirm that xprog 5.70 can erase 3580 in circuit from Moldovan1's pinout. Interestingly, the top 2 rows 0x000 and 0x010 are all 0 after erase, the rest is filled with FF. You can fill the first 2 lines with FF then reflash and the chip is totally blank. Also wrote the dump back onto the old cluster, read then compared with original read in hex editor. Streams are identical, so all seems good. Next job is to prep the new cluster then flash that.
RE: BMW X5 2004 DASH PINOUT - Ecutech - 02-09-2019
Finally got around to fitting cloned cluster. I can confirm it works perfectly. Thank you to those that offered help and advice.