(24-11-2018, 15:09 PM)kirukisu Wrote:  My clone died on me, good that notebook is fine becouse it shorted badly. As you can see there was alot heat going on. What was  that missing  part fuse, resistor, capacitor? The little one marked on second photo is also bad. Could someone check their and share with me? Its oposite mini usb slot. Wanna try to change and see if its going to be working. It's not seen by pc anymore but when it is powered by 12V it blinks normally. Could someone help with troubleshooting? USB module might be fried i guess. This one is bad bluetooth version so can't check that way with my odis. 

(24-04-2019, 22:29 PM)tsimplas007 Wrote:  Hi!

During rework, I lost the component you can see in blue circle. Could someone tell the part number of this?

Best Regards.

PS. The reworked VAS5054A seems to be working fine without it also...!

(25-04-2019, 07:12 AM)rightpcb Wrote:  

(24-04-2019, 22:29 PM)tsimplas007 Wrote:  Hi!

During rework, I lost the component you can see in blue circle. Could someone tell the part number of this?

Best Regards.

PS. The reworked VAS5054A seems to be working fine without it also...!

It is the same as the one next door with "aas" mask

(04-11-2018, 03:16 AM)turbocip Wrote:  

(16-10-2018, 12:28 PM)turp9 Wrote:  Can anyone give confirmed link where to get original AMB2300? I have tools and parts to rework but AMB2300 is hard to find.Can even trade my tool(partially reworked-with issi ram and voltage regulator) for original AMB2300.

Im interested too.

(04-05-2019, 22:59 PM)DoZe Wrote:  

(04-11-2018, 03:16 AM)turbocip Wrote:  

(16-10-2018, 12:28 PM)turp9 Wrote:  Can anyone give confirmed link where to get original AMB2300? I have tools and parts to rework but AMB2300 is hard to find.Can even trade my tool(partially reworked-with issi ram and voltage regulator) for original AMB2300.

Im interested too.

Me too, it seems some have a lot in stock !



i made a request to Component Sense, we'll see if it's possible at not crazy price.

(05-10-2017, 04:45 AM)ninja_zx11 Wrote:  

(04-10-2017, 15:01 PM)Enabled Wrote:  TJA1050 is High Speed
TJA1054A is Low Speed (can be replaced with newer TJA1055)

Thanks for the idea about TJA1055 being compatible.I removed fake TJA1054,OKI from my Vas head.AU5780A was already missing from it

I did some bench-marking today.
I have 2 vas heads now.
A) with 3.3v,70ns RAM,Non AMB module under a amb2300 shield with genuine looking ceramic antenna.
B)now with ISSIS 5v 10ns RAM with genuine AMB2300 module.
My findings:
With USB connection:B is ~4 secs faster than A in displaying control module list using odis -S 4.2.2 from the moment i click start diagnosis.

With bluetooth connection: A is ~14 secs faster than B.For some reason third party bluetooth is faster than the genuine amb2300.Third party module has a better signal strength too..With A i can easily connect my car(parked in my garage) from my living room but with B(genuine amb2300,i could not.

Also don't know what they did,A can take PDU updates and downgrades like a genuine one with no problem despite being non AMB.It even works with newer ODIS-E 7.2.Only draw back is i can't change buzzer and power down settings with it.But signal and speed wise,its better than genuine AMB.

(05-05-2019, 20:53 PM)DoZe Wrote:  I Don't know if the problem come from this point, but i read the 25 pages of this thread and one Point never adressed about the Infineon chip, 2 models exist (correct me if i'm wrong) :