+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: VAG Group (VW - Audi - Seat - Skoda - Bentley) (https://cartechnology.co.uk/forumdisplay.php?fid=55)
+---- Thread: VAS5054A PCB Difference (/showthread.php?tid=4905)
RE: VAS5054A PCB Difference - no_name - 11-09-2019
I received mine, what I was looking was:
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300
And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...
I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
RE: VAS5054A PCB Difference - toza27 - 11-09-2019
(11-09-2019, 20:40 PM)no_name Wrote: I received mine, what I was looking was:You hawe a good unit for rework. Kan buy a original AMBER 2300 from Ebay, and all ader component from Mouser.
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300
And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...
I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
Will be a good unit. For AMB2300 firmware send me a PM.
RE: VAS5054A PCB Difference - no_name - 12-09-2019
(11-09-2019, 22:19 PM)toza27 Wrote:(11-09-2019, 20:40 PM)no_name Wrote: I received mine, what I was looking was:You hawe a good unit for rework. Kan buy a original AMBER 2300 from Ebay, and all ader component from Mouser.
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300
And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...
I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
Will be a good unit. For AMB2300 firmware send me a PM.
I installed VAS PC and found that I have 700.2114 error connected to my TJA1054 which i corrected positioned, could it be because of wrong position of the DIODE near by? Does somebody have a clue?
RE: VAS5054A PCB Difference - aka99 - 12-09-2019
no maybe tja 1054at is a fake chip not working. first it is to replace tja with a working done and then to retest in vas pc.then you get new error code....
(12-09-2019, 04:21 AM)aka99 Wrote: no maybe tja 1054at is a fake chip not working. first it is to replace tja with a working done and then to retest in vas pc.then you get new error code....
read here
RE: VAS5054A PCB Difference - toza27 - 12-09-2019
(12-09-2019, 00:14 AM)no_name Wrote:Your TJA1054 is fake, need to be replaced.(11-09-2019, 22:19 PM)toza27 Wrote:(11-09-2019, 20:40 PM)no_name Wrote: I received mine, what I was looking was:You hawe a good unit for rework. Kan buy a original AMBER 2300 from Ebay, and all ader component from Mouser.
1. ...55F SDRAMs since they were supposed to be working on 5v even they are slower a little bit, but that is ok for me
2. I did not care about OKI, just wanted tool with right diode order and chips
3. I wanted to find one with ORI amb2300
And when I find one that looked like I wanted on pics, I ordered it and received it and connected it via BT and USB to ODSI from virtual, also to Forcar as passthru, but when I opened it I was disappointed, and here are pics so you can now why...
I am right now talking with seller if we dont find agreement I will open a dispute on Ali...
Will be a good unit. For AMB2300 firmware send me a PM.
I installed VAS PC and found that I have 700.2114 error connected to my TJA1054 which i corrected positioned, could it be because of wrong position of the DIODE near by? Does somebody have a clue?
RE: VAS5054A PCB Difference - kiranabc - 12-09-2019
this unit is one of the best on the market and you can just change some staff,
also it is just 60$
RE: VAS5054A PCB Difference - toza27 - 12-09-2019
For original AMB2300 search on Ebay Amber Wireless 2300.
RE: VAS5054A PCB Difference - shubietah - 18-08-2022
Hi, anyone have the dump file for AM29F160DB ? i will try to fix mine as it dies during the upgrade, not seen in USB , led flash one time once connected to OBD...