+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Polo 2007 xtool which menu option for obd? (/showthread.php?tid=10350)
Polo 2007 xtool which menu option for obd? - pietje001 - 03-10-2015
Hi.
on the website of xtool says i can do a vw polo 2007 by obd.
but I dont see menu option?
thnx
RE: Polo 2007 xtool which menu option for obd? - salo.ekt - 03-10-2015
Xtool can be checked according to different versions, it will determine the correct diagnosis or see section 17
RE: Polo 2007 xtool which menu option for obd? - Dash_Burner - 03-10-2015
(03-10-2015, 10:00 AM)pietje001 Wrote: Hi.
on the website of xtool says i can do a vw polo 2007 by obd.
but I dont see menu option?
thnx
Its two kind of Dashes for polo 2007. One uses 93C86 chip and other uses MCU. X-tool has the option for 93C86 in menu---> VW-Kline---93C86. If dash version is with 93C86 chip X-tool wil recognize it (version recognized) and will do the job. If it is with MCU you must use another tool, remove dash and solder a few cables from behind (digiprog can do the job very well).