+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Used EGS module to another car... (/showthread.php?tid=10378)
Pages:
1
2
Used EGS module to another car... - Bimmeristi - 04-10-2015
Who can tell is possible programming used EGS module with ISTA-P to another car?
And should that do manually, putting assembly number for EGS to get correct sofware for it?
I have tried automatic option, but software version is not correct for EGS assemble number.
Or is only way use WinKFP?
I have hear, EGS can programming is bench also. Put that need right pins. Is here any who have done that, howto?
Car is E46 330da
RE: Used EGS module to another car... - koziol - 05-10-2015
Also need that info
RE: Used EGS module to another car... - Bimmeristi - 05-10-2015
I have seen something about manual programming in ISTA. Maybe i can use that and put my car assembly number there and it give then correct software? Can that do with used EGS? Or need WinKFP to force programming correct software...
RE: Used EGS module to another car... - cursor - 06-10-2015
Software number for E46 is available in ETK(also realoem etc. )
You can do this with WinKFP.
In comfort mode chose F1(enter ZUSB). Enter program number from ETK. Then choose done(F8), enter VIN long, and click program zusb
Sorry for my english, i'am from Poland
RE: Used EGS module to another car... - Bimmeristi - 06-10-2015
(06-10-2015, 14:11 PM)cursor Wrote: Software number for E46 is available in ETK(also realoem etc. )
You can do this with WinKFP.
In comfort mode chose F1(enter ZUSB). Enter program number from ETK. Then choose done(F8), enter VIN long, and click program zusb
Sorry for my english, i'am from Poland
I need next find out what folders and files i need for that. I have installed BMW standard tools. I'll have also E46 sp-daten folder with files. I should use these with WinKFP. How to setup WinKFP for programming?
I am gonna use ICOM A2 interface. SO need put static ip to ediabas.ini and port 6801. Then use itoolradar to reserve ip and use WinKFP...
RE: Used EGS module to another car... - Bimmeristi - 09-10-2015
(06-10-2015, 14:11 PM)cursor Wrote: Software number for E46 is available in ETK(also realoem etc. )
You can do this with WinKFP.
In comfort mode chose F1(enter ZUSB). Enter program number from ETK. Then choose done(F8), enter VIN long, and click program zusb
Sorry for my english, i'am from Poland
Tried that. but fail. SO need to be done expert -mode. What info need then, i think WinKFP ask versions many times while programming, what need put there...?
RE: Used EGS module to another car... - Bimmeristi - 10-10-2015
Does anyone know is possible programming in bench those EGS -modules? What pins should use?
RE: Used EGS module to another car... - cursor - 12-10-2015
Put here your VIN(last 7 digit)
RE: Used EGS module to another car... - Bimmeristi - 13-10-2015
(12-10-2015, 10:08 AM)cursor Wrote: Put here your VIN(last 7 digit)
What for? Can send PM if need.
Or maybe gonna try some day again with expert- mode.
RE: Used EGS module to another car... - cursor - 14-10-2015
I will find you correct software number in ETK.
I program with WinKFP many EGS module. If part number(on EGS module) is correct for your car, it must work.
I used in E39 530d, EGS module from gasoline engine. After programming with correct software it works without problems.
Send me your Vin number and part number from EGS Module. I'il try help you
Sorry for my bad englisch, i'am from Poland