CarTechnoloGY
FVDI 2015 PCB DAMAGE - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: FVDI 2015 PCB DAMAGE (/showthread.php?tid=10602)

FVDI 2015 PCB DAMAGE - sebasapri - 15-10-2015

Hi to all !!!
So recent come to my hands the FVDI 2015 of FLYOBD (china Factory) , all i could do is install and have headche. Why ? because I had problems from the installation and then turn off and not lit more . So I do not recommend at all this factory they have 3 skype for technical support and none was able to respond.fubar
The programmer has less than 24 hours, This version is upgradeable and more expensive too, but I could not prove anything.
The result two diodes and one capacitor are damage headbang WTF !!!!!!angry
Why ? I dont know, but I have my suspicions I think the quality is rubbish puke I send an email and a lot of msj to responsible person, and asked for a manual components I need to repair with measure osciloscope and list of component, I only have to wait, and if not repaired by my means.
END THE STORY
I hope that many prospective buyers serve them my experience !!!
thanks for watching or readinghi


banned banned banned FLYOBD banned banned banned NOT RECOMMEND puke

RE: FVDI 2015 PCB DAMAGE - djdanny - 17-11-2015

(15-10-2015, 06:04 AM)sebasapri Wrote:  Hi to all !!!
So recent come to my hands the FVDI 2015 of FLYOBD (china Factory) , all i could do is install and have headche. Why ? because I had problems from the installation and then turn off and not lit more . So I do not recommend at all this factory they have 3 skype for technical support and none was able to respond.fubar
The programmer has less than 24 hours, This version is upgradeable and more expensive too, but I could not prove anything.
The result two diodes and one capacitor are damage headbang WTF !!!!!!angry
Why ? I dont know, but I have my suspicions I think the quality is rubbish puke I send an email and a lot of msj to responsible person, and asked for a manual components I need to repair with measure osciloscope and list of component, I only have to wait, and if not repaired by my means.
END THE STORY
I hope that many prospective buyers serve them my experience !!!
thanks for watching or readinghi


banned banned banned FLYOBD banned banned banned NOT RECOMMEND puke

It sells a defective product? i buy.

RE: FVDI 2015 PCB DAMAGE - sebasapri - 01-12-2015

I send to China FOR REPAIR.

RE: FVDI 2015 PCB DAMAGE - Bimmeristi - 09-12-2015

(01-12-2015, 15:51 PM)sebasapri Wrote:  I send to China FOR REPAIR.

Warranty? You have to pay returning or company pay?