+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: ISTA-P 3.57.0.400 (/showthread.php?tid=10817)
RE: ISTA-P 3.57.0.400 - ATC - 01-11-2015
(01-11-2015, 00:48 AM)Studie Wrote: The logs are not text files how do I open them to read?
They must have extension .7zip.log
The file format is as follows.
YYYYMMDD_HHMISS_3.57.0.400_4.1.1_InstallerLogs.7zip.log
You must change the extension .7zip.log by .zip (eg)
Then, you can open the file with WinZip
A greeting
ATC
RE: ISTA-P 3.57.0.400 - ruben_17non - 01-11-2015
(01-11-2015, 00:48 AM)Studie Wrote:(31-10-2015, 21:16 PM)ruben_17non Wrote:(31-10-2015, 19:49 PM)Studie Wrote:(31-10-2015, 19:33 PM)ruben_17non Wrote:(31-10-2015, 19:10 PM)Studie Wrote: Having trouble installing on top of my existing install.
I already un-installed the older ista-p, and tried to install on top but no luck.
Could anyone advise how to fix this problem? Much thanks.
Check log. you have space in HDD?
Yes I am using a 750GB HDD. Where is the log saved to?
Thanks
If you have ISTAP V56 the best way is remove.
Check log in:
C:\ProgramData\BMW\ISPI\Logs\TRIC\ISTA-P
The logs are not text files how do I open them to read?
Unpack with winrar or other, after this open files with TExt editor
and search error in final of text
RE: ISTA-P 3.57.0.400 - abuqutaita - 01-11-2015
(31-10-2015, 19:10 PM)Studie Wrote: Having trouble installing on top of my existing install.
I already un-installed the older ista-p, and tried to install on top but no luck.
Could anyone advise how to fix this problem? Much thanks.
I ran into this problem attempting an upgrade from ISTA-P 3.56.3.002. For that version, I wasn't given an installer, so I had copied the bits directly to C:\ISTA-P. Without cleaning anything up first, I attempted to run the MSI and saw this same error.
I don't think it's a HDD space issue or memory issue as those checks are much earlier in the installer. And there's a specific message in the logs about failing the hardware check in this case.
I didn't attempt to resolve the issue in my case, as this was running ISTA-P in a VM, so I reverted to a checkpoint before ISTA-P was copied and run. The installer worked fine in a clean VM.
You can try running the MSI with more logging info by using this command:
"msiexec /l* ista-p.log /i BMW_ISPI_ISTA-P_SYS_3.57.0.400.msi"
Perhaps this will point to why the installer is stopping.
RE: ISTA-P 3.57.0.400 - Studie - 01-11-2015
(01-11-2015, 13:21 PM)ruben_17non Wrote:(01-11-2015, 00:48 AM)Studie Wrote:(31-10-2015, 21:16 PM)ruben_17non Wrote:(31-10-2015, 19:49 PM)Studie Wrote:(31-10-2015, 19:33 PM)ruben_17non Wrote: Check log. you have space in HDD?
Yes I am using a 750GB HDD. Where is the log saved to?
Thanks
If you have ISTAP V56 the best way is remove.
Check log in:
C:\ProgramData\BMW\ISPI\Logs\TRIC\ISTA-P
The logs are not text files how do I open them to read?
Unpack with winrar or other, after this open files with TExt editor
and search error in final of text
I was only able to find an error in the LaunchInstallation.log text.
PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Datei existiert weder auf Distributionsmedium noch im Zielverzeichnis ErrorFileNotFoundInSourceOrTarget
31/10/2015-8:57 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Fehler bei Ausfuehrung ErrorFailedExecute
31/10/2015-8:57 PM INFO: LISTENER: MessageType: Error MessageButtonType: Ok Arguments: Installation fehlgeschlagen ErrorFailedInstallation
31/10/2015-8:57 PM ERROR: Installationsvorgang fehlgeschlagen (ErrorCode: ErrorCode:Invalid #-2)
31/10/2015-8:57 PM ERROR: Setzen des Installationsmodus fehlgeschlagen. Breche Installation ab.
31/10/2015-8:57 PM ERROR: Konfigurieren und Starten des IFS-Installers fehlgeschlagen.
31/10/2015-8:57 PM ERROR: CustomAction 'LaunchInstallation' fehlgeschlagen.
And the PreinstallCleanup.log
31/10/2015-8:55 PM ERROR: Janitor.WipeFingerprints(): Unable to delete fingerprint directory since it doesnt exist
RE: ISTA-P 3.57.0.400 - hojo29 - 03-11-2015
I use ISTA / P with original ICOM and in the new ISTA / P is not displayed ICOM. Does anyone here have also found this problem and have a solution?
RE: ISTA-P 3.57.0.400 - osd - 03-11-2015
(03-11-2015, 21:21 PM)hojo29 Wrote: I use ISTA / P with original ICOM and in the new ISTA / P is not displayed ICOM. Does anyone here have also found this problem and have a solution?
Press small button on the top of ISTA - connection manager, it is look like a small book. ISTA should adapt ICOM which own requirements and update firmware if necessary. Did you turn off all firewalls and antyvirus softwares ?
RE: ISTA-P 3.57.0.400 - KaiO - 03-11-2015
Firmware update necessary
RE: ISTA-P 3.57.0.400 - hojo29 - 03-11-2015
Ok will test it again tomorrow.
ICOM firmware is already installed new
RE: ISTA-P 3.57.0.400 - TibeRiuSca - 04-11-2015
What is the latest icom firmware?
RE: ISTA-P 3.57.0.400 - masa52 - 04-11-2015
03-14-03
ICOM-BootImage-01-25-02
ICOM-ApplicationImage-01-40-05