(06-02-2014, 00:02 AM)cop20 Wrote:  Hi,my HWID is
PFgPpo3eWhMy0+ML7/xcLA==
THANKS

First off all >>READ THE RULES<<

Then your first post should be >>HERE!!<<

(06-02-2014, 08:11 AM)dragonheart84 Wrote:  HI!! MY HWID is oPzbP3HBcd8OyLLcklbfnX+Vuvg=

once i downloaded this is the same for all my PC's ?
do i need another hwid if i want to use another computer?

Thank a lot!!

(05-02-2014, 18:02 PM)lgetov Wrote:  Hi,my HVID is:
HPzVa6Xkf2TySsSxtqoPZOuSHWg=
Thanks

(20-09-2013, 12:58 PM)volavka Wrote:  IMMO Universal Decoding 3.2 is the best software to remove the IMMO code of ECU. The software IMMO Universal Decoding is compatible with read file with programmer such as UPA-USB, WELLON Series VP/GP, Galep, Serial and many other (not supplied with the software). Once loaded the read file of the ECU, The software will repair the IMMO code. For many ECU, there is the possibility to make virgin the IMMO in order to recode, according to the value of original key, or to delete definitively (not recode).

The software included:
61 Brand
888 Compatible system for above 10000 model of cars
1100 Photos
680 MASK of identification

In this release it was introduced new 1100 Photos ECU, the position of memories, plans, pinout, and much more. It has also been added to auto-verification of EPROM and “ALL Version Auto Check“ to identify the version of the ECU.

The latest software version 3.2, compared with the previous version a lot of updates and fixes, added a huge list of processed firmware control units.

The program is very easy:
1. Reads dump any loader that supports desired controller.
2. Open the file Flash, read from the control car.
3. Process the file in the program.
4. Load dump the same loader, back to the control unit.
---------------------------------------------------------------------



For Activation this software, Put ur HWIDGen Here
password rar include txt


WBR volavka

(06-02-2014, 14:25 PM)ecuallaves Wrote:  

(20-09-2013, 12:58 PM)volavka Wrote:  IMMO Universal Decoding 3.2 is the best software to remove the IMMO code of ECU. The software IMMO Universal Decoding is compatible with read file with programmer such as UPA-USB, WELLON Series VP/GP, Galep, Serial and many other (not supplied with the software). Once loaded the read file of the ECU, The software will repair the IMMO code. For many ECU, there is the possibility to make virgin the IMMO in order to recode, according to the value of original key, or to delete definitively (not recode).

The software included:
61 Brand
888 Compatible system for above 10000 model of cars
1100 Photos
680 MASK of identification

In this release it was introduced new 1100 Photos ECU, the position of memories, plans, pinout, and much more. It has also been added to auto-verification of EPROM and “ALL Version Auto Check“ to identify the version of the ECU.

The latest software version 3.2, compared with the previous version a lot of updates and fixes, added a huge list of processed firmware control units.

The program is very easy:
1. Reads dump any loader that supports desired controller.
2. Open the file Flash, read from the control car.
3. Process the file in the program.
4. Load dump the same loader, back to the control unit.
---------------------------------------------------------------------



For Activation this software, Put ur HWIDGen Here
password rar include txt


WBR volavka

hi please ZLVk8K0qJyoKd7UxexdhiA== thanks my friend

(07-02-2014, 09:28 AM)cliocoppa Wrote:  Hi!
My hwid is:

lNsLCLGHshUedccYftosbX/V8E0=

Thank you in advance!!