CarTechnoloGY
TMP47P860N and MC68HC11KA4 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: TMP47P860N and MC68HC11KA4 (/showthread.php?tid=11851)

TMP47P860N and MC68HC11KA4 - pilif - 08-12-2015

Hi friends.

I am having troubles in connections whit those two MCU's.
I can not read them that's pretty annoying.
Can someone share some connections schemes ?

MC68HC11KA4 - vw Beta 5 radios
TMP47P860N - Vw gamma 3 2404+2404 ?

I own an Orange 5, XProg-m(fresh converted to Luis Andre Version), TL866CS ( fresh converted to TL866A) and an PICkit 3

I hope that those are enough

Kindly Regards, pilif

RE: TMP47P860N and MC68HC11KA4 - masterskay62 - 08-12-2015

Hi.
    MC68HC11KA4

RE: TMP47P860N and MC68HC11KA4 - cubica - 08-12-2015

Regarding gamma3 (2 x 24c04) it is too much old radio, but...
you need to build an interface and connect to radio and start simulating code entry from front panel..u need win 98se smile PIII 800Mhz and pure DOS...a little bit too much old stuff for young members here biggrin
This was my first decoded radio in my life drive thanks to russian decode brothers handshake
regards,
cuby

RE: TMP47P860N and MC68HC11KA4 - audio - 08-12-2015

Hi!
My Gamma3 decoding biggrin
Big thanks for programmer, unfortunately, I do not know but high regard thanks.
wbr.

RE: TMP47P860N and MC68HC11KA4 - cubica - 08-12-2015

Simple said ART biggrin I think this working only on 24c02+24c04 version?
rgds,
cuby

RE: TMP47P860N and MC68HC11KA4 - audio - 08-12-2015

(08-12-2015, 19:15 PM)cubica Wrote:  Simple said ART biggrin I think this working only on 24c02+24c04 version?
rgds,
cuby

I do not know it was a long time ago think
watch the clock speed of 133 MHz hehe biggrin computer, even until what I use

RE: TMP47P860N and MC68HC11KA4 - gregory77 - 04-10-2018

Hi,

Could you send me the software?

Thanks,
Gerogry



(08-12-2015, 17:59 PM)cubica Wrote:  Regarding gamma3 (2 x 24c04) it is too much old radio,  but...
you need to build an interface and connect to radio and start simulating code entry from front panel..u need win 98se smile PIII 800Mhz and pure DOS...a little bit too much old stuff for young members here biggrin
This was my first decoded radio in my life drive thanks to russian decode brothers handshake
regards,
cuby