【 +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: 【 Pages:
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
|
RE: DTC off for free - dareczek - 02-11-2016 Hi please help dpf off by Opel Insygnia 2.0 EDC17C19 Thanks RE: DTC off for free - brembo - 02-11-2016 (02-11-2016, 13:36 PM)cattivik Wrote: Please me send file DTC OFF P1453 Nissan QASHQAI EDC17C42 P1453 RE: DTC off for free - advanced - 02-11-2016 Hi solved Thanks RE: DTC off for free - cattivik - 03-11-2016 (02-11-2016, 21:00 PM)brembo Wrote:(02-11-2016, 13:36 PM)cattivik Wrote: Please me send file DTC OFF P1453 Nissan QASHQAI EDC17C42 the P1453 error is no longer active but now me error 00009229, and you put in limp mode ... I assume that it is a derivation of the DTC 0000, you can disable it P0000? RE: DTC off for free - ROD-BENDERS - 03-11-2016 (03-11-2016, 13:59 PM)cattivik Wrote:(02-11-2016, 21:00 PM)brembo Wrote:(02-11-2016, 13:36 PM)cattivik Wrote: Please me send file DTC OFF P1453 Nissan QASHQAI EDC17C42 Hi mate you need DPF off done properly and perhaps ori file RE: DTC off for free - pukymar - 03-11-2016 Hello can help me please remove dtc p2015? car passat 2007 engine (CBDC)2.0 edc 17CP20 read flash with FGtech V54 VW Hardware Number: 03L907309B this is error 1 Fault Found 008213 - Intake Manifold Flap Position Sensor (Bank 1) P2015 - 000 - Implausible Signal - MIL ON RE: DTC off for free - ROD-BENDERS - 03-11-2016 (03-11-2016, 17:17 PM)pukymar Wrote: Hello can help me please remove dtc p2015? pukymar P2015 x4 off dont forget to checksum ! RE: DTC off for free - pukymar - 03-11-2016 (03-11-2016, 18:04 PM)Buzzard Wrote:(03-11-2016, 17:17 PM)pukymar Wrote: Hello can help me please remove dtc p2015? Hmmm ... FGtech checksum not written for it. You can correct it anyone? RE: DTC off for free - ROD-BENDERS - 03-11-2016 (03-11-2016, 18:15 PM)pukymar Wrote:(03-11-2016, 18:04 PM)Buzzard Wrote:(03-11-2016, 17:17 PM)pukymar Wrote: Hello can help me please remove dtc p2015? pukymar doing checksum is a relatively simple thing for most ecu's with free winols available here on the site drag n drop the ori file onto winols yes yes yes to boxes, drag n drop the mod file over the top, go to project and export the file with corrected checksums ok here like this RE: DTC off for free - cattivik - 03-11-2016 (03-11-2016, 16:07 PM)Buzzard Wrote:(03-11-2016, 13:59 PM)cattivik Wrote:(02-11-2016, 21:00 PM)brembo Wrote:(02-11-2016, 13:36 PM)cattivik Wrote: Please me send file DTC OFF P1453 Nissan QASHQAI EDC17C42 file dpf off processed with ESS software ... |