+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Anyone know if digiprog will do 02 7series bmw (/showthread.php?tid=11957)
Pages:
1
2
Anyone know if digiprog will do 02 7series bmw - DashPro - 12-12-2015
Anyone know if a digiprog will actually write the 35080 chip
also does anyone know if it will do the cas3 obd?
has anyone actually done it with a digiprog clone
or carprog clone or tachopro junk
I have all the manuals from digi and enigma and such
I just wondered if had done one successfully with it before I embark
on such a journey?
much thanks
RE: Anyone know if digiprog will do 02 7series bmw - dime - 12-12-2015
R270 and rosfar red box.
RE: Anyone know if digiprog will do 02 7series bmw - Dash_Burner - 13-12-2015
(12-12-2015, 21:21 PM)DashPro Wrote: Anyone know if a digiprog will actually write the 35080 chip
also does anyone know if it will do the cas3 obd?
has anyone actually done it with a digiprog clone
or carprog clone or tachopro junk
I have all the manuals from digi and enigma and such
I just wondered if had done one successfully with it before I embark
on such a journey?
much thanks
I believe that ENIGMA is a good tool for that job. I dont know if it can do 35080 chip but i believe that a 5-6000 euros tool can do this chip. Does enigma has eraser for this chip?
In my opinion avoid to use digi for this kind of cars.
RE: Anyone know if digiprog will do 02 7series bmw - DashPro - 13-12-2015
Yeah I figured that thanks for the hints right direction
RE: Anyone know if digiprog will do 02 7series bmw - qwert3433 - 13-12-2015
R270 You can help.
RE: Anyone know if digiprog will do 02 7series bmw - octav_kiss - 13-12-2015
M35080 erasser by smok.super work.
RE: Anyone know if digiprog will do 02 7series bmw - antenor - 13-12-2015
Digipro3 and R270 can do it.
RE: Anyone know if digiprog will do 02 7series bmw - XmoDDeR - 13-12-2015
Alll blah , pre facelift tacho does cas no fuse pull, facelift fuse to pull.
digi does 35080 chip well if erasable version, if not swap chip read with digi swasp chip with blank , enter needed miles and write , then swap chips in dash simple.
yes r270 if you want to remove cas yes it will work , for both cas and erase chip. so many options .
i have done 12 e65 cas with tacho2008 those those that curse the tool either have a bad one and thats rare or dont know how to use it.
and i may add i just looked its a 2002 that is prefacelift car can be all done with tacho in 30 mins
fertig
RE: Anyone know if digiprog will do 02 7series bmw - dime - 13-12-2015
Another solution. I bought a new M35080 3-5 usd. Program the new and completed work. I do not need expensive eraser.
RE: Anyone know if digiprog will do 02 7series bmw - XmoDDeR - 13-12-2015
I just said that ..........................................wowzers