CarProg All Questions/Answers Here! - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10) +--- Thread: CarProg All Questions/Answers Here! (/showthread.php?tid=12004) |
CarProg All Questions/Answers Here! - mojsterb - 31-08-2015 Hello, i have Carprog clone and can't read 24c16 eeprom from VW Touran 2003 cluster. What can be wrong? It shows only 00 00 00... Thanks for helping. RE: Carprog doesn't read 24c16 - teerak2uk - 31-08-2015 Why dont you read obd RE: Carprog doesn't read 24c16 - DIMITYRMILEV - 31-08-2015 Change 4pcs 74hc125 whit 74hct125M smd in your carprog , and all will by ok. RE: Carprog doesn't read 24c16 - mojsterb - 01-09-2015 (31-08-2015, 17:59 PM)teerak2uk Wrote: Why dont you read obd I don't know if works with OBD. I will try next time. (31-08-2015, 18:29 PM)DIMITYRMILEV Wrote: Change 4pcs 74hc125 whit 74hct125M smd in your carprog , and all will by ok. Really? Because it can read 93c56 and 93c66. Do i need hot air station for repairing this? RE: Carprog doesn't read 24c16 - teerak2uk - 21-09-2015 Hot air is easier just keep pressure down or it will blow parts off the board RE: Carprog doesn't read 24c16 - EduardNN - 02-10-2015 Repair Patch for 24xx Carprog Clone Is a Useless turd.... anyone have anything to make it not stink so bad - DashPro - 15-12-2015 I think carprog clone is close to as crappy as tachopro08 anyone think im wrong hahah prove it RE: Carprog Clone Is a Useless turd.... anyone have anything to make it not stink so bad - XmoDDeR - 15-12-2015 Well tacho2008 works i know that and half of mexico, india and other countries where that tool is still used and held in high regard. i would use it myself all the time but other stuff is closer in reach. Carprog clone many members can say it will work have to tweak it ,and read the manuals really only for mcu usage. I have retooled and remade many of my own adapters , also changed bridges , caps , oclis crystal etc on mainboard also flashed to 4.74 firm . all the N/a are gone and eprom and mcu reading is great no faults. also fixed ground plane and insulated board from aluminum case with k tape. its working fine now but has a nice coat of dust on it , i just brought original so lets see all the faults i find with this one...................cheers RE: Carprog Clone Is a Useless turd.... anyone have anything to make it not stink so bad - DashPro - 15-12-2015 Tachopro still sux RE: Carprog Clone Is a Useless turd.... anyone have anything to make it not stink so bad - XmoDDeR - 15-12-2015 Will do that 2002 e65 no issues.....lol |