+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Car Technology Motorbikes Forums (https://cartechnology.co.uk/forumdisplay.php?fid=23)
+--- Forum: Motorbikes Hardware & Tools (https://cartechnology.co.uk/forumdisplay.php?fid=38)
+--- Thread: Motorcycle Dyno Software (/showthread.php?tid=12400)
Motorcycle Dyno Software - ROD-BENDERS - 02-01-2016
Here is the final version of the Dynomec B1 software which you will need to make your own fully functional motorcycle inertia Dyno. Its settings are fully adjustable see instruction manual.
Pc will need a hardware serial port and a usb mouse for correct functioning once the pass through box is connected to roller sensor, wideband lambda, and rpm sensor for ignition system.
You will need to make a frame with a heavy roller, you will also need to make or buy a pass through box with wideband lambda (Data aquisition unit), this can also be purchased online for a few hundred pounds, for more information, search google or youtube for all the Dynomec inertia Dynamometer Systems stuff, build your own inertia dyno etc. Once you have built and calibrated the dyno they are highly accurate in reading rpm, bhp and torque, print custom graphs, air fuel ratio etc. works well.
Just run the software from its folder, create shortcuts to desktop. Change settings by editing a file, like roller diameter and mass, business name and phone number etc.
I think that maybe this is the only place where you can get this full soft for free.
Pm for pass
FREE4U2USE
RE: Motorcycle Dyno Software - ROD-BENDERS - 06-01-2016
Tested only on windows xp 32bit
Sent from my SM-N910F using Tapatalk