Ford file and tutorial to time freeze - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Ford - Mazda (https://cartechnology.co.uk/forumdisplay.php?fid=69) +---- Thread: Ford file and tutorial to time freeze (/showthread.php?tid=12605) |
Ford file and tutorial to time freeze - alexjpjp - 10-01-2016 Ford file and tutorial to time freeze ok this is my first tutorial ope it ok pleas if this help you give me a thanks and reputation no password for now if no tanks i will had password and one more thing dont forget to disable windows time sync in windows ford virtualbox dont foget to set you power shell with adminitrator right Open "Windows PowerShell" from Start Menu as Administrator. Run following command and answer question as [Y]. Set-ExecutionPolicy RemoteSigned RE: Ford file and tutorial to time freeze - Joe2 - 10-01-2016 Could you please help in appropriate start file definition for Vmware ? As I understand you example is for VirtualBox. RE: Ford file and tutorial to time freeze - alexjpjp - 10-01-2016 Had this to you virtual configuration file time.synchronize.allow = "FALSE" time.synchronize.allow.backward = "FALSE" time.synchronize.continue.backward = "FALSE" time.synchronize.pause = "FALSE" time.synchronize.pause.backward = "FALSE" time.synchronize.restore.backward = "FALSE" time.synchronize.shrink.backward = "FALSE" time.synchronize.tools.enable = "FALSE" time.synchronize.tools.percentCorrection = "FALSE" time.synchronize.tools.slewCorrection = "FALSE" rtc.startTime = 1437701000 in your vm folder you wil have a config file open with note pad find the tools.syncTime = "FALSE" make enter and paste here no space save and start you time wil be freeze dont forget to close you virtual when your done using ids you good for life now RE: Ford file and tutorial to time freeze - Joe2 - 10-01-2016 Could you please explain how time/date is recalculated on minutes or hours this you put for rtc.startTime ? RE: Ford file and tutorial to time freeze - alexjpjp - 10-01-2016 Use online calculator http://www.mbari.org/staff/rich/utccalc.htm and one more thing dont forget to disable windows time sync in windows RE: Ford file and tutorial to time freeze - viejomatius - 25-02-2016 How can i freeze date, on normal instalation, Not virtual machine Thanks for your help RE: Ford file and tutorial to time freeze - alexjpjp - 07-03-2016 With deepfreeze check on youtube for how to RE: Ford file and tutorial to time freeze - mauroxj - 09-03-2016 Hi, as far as I've learned, time cannot be freezed in normal mode.. you have to manually set the day back to the date of installation (usually 1st Aug 2015) every 3 days (or next time you are going to work with IDS). RE: Ford file and tutorial to time freeze - Gatsby79 - 29-03-2016 I've used deepfreeze tool but every 3 days i must change bios date to work again. any solution about this issue? (native installation on Dell PC) |