+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: PSA Group (Citroen - Peugeot) (https://cartechnology.co.uk/forumdisplay.php?fid=56)
+---- Thread: DiagBox 8.01 Installation (/showthread.php?tid=13539)
RE: DiagBox 8.01 Installation - Simple - 07-09-2018
DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..
RE: DiagBox 8.01 Installation - cro1983 - 12-09-2018
(07-09-2018, 15:58 PM)Simple Wrote: DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..
Where can it be downloaded?
RE: DiagBox 8.01 Installation - lvlacleod - 14-09-2018
Simple, did I read a post you made somewhere that you could only confirm the last version that telecoding works with was 7.62?
Has that changed at all?
(12-09-2018, 14:24 PM)cro1983 Wrote:(07-09-2018, 15:58 PM)Simple Wrote: DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..
Where can it be downloaded?
Not sure if this is it.
RE: DiagBox 8.01 Installation - Simple - 14-09-2018
Yes, DiagBox v7.62 was the last that release that can Telecode all cars released prior to 7.62. Later (reconfigured) DiagBox releases had issues with some cars.
I expect that v9.23 will Telecode all cars released before it, later fixes were released for DiagBox 9.xx that may have an issue.
However, I usually participate in software that is reconfigured to help others and for fun.
RE: DiagBox 8.01 Installation - cro1983 - 21-09-2018
I get these message when I want open link
Code:
Invalid Thread specified. If you followed a valid link,(14-09-2018, 16:33 PM)lvlacleod Wrote:(12-09-2018, 14:24 PM)cro1983 Wrote:(07-09-2018, 15:58 PM)Simple Wrote: DiagBox v9.23 is already cracked and someone on a French site is selling the license for 30 Euros..
Where can it be downloaded?
Not sure if this is it.
RE: DiagBox 8.01 Installation - mara- - 23-09-2018
Simple, is there any way to enable telecoding for 7.83? 7.62 is to old to recognize many stuff for my Peugeot 308 T9.
RE: DiagBox 8.01 Installation - Simple - 24-09-2018
No it is not too old and there are ways, but you need someone committed to doing it as it takes for ever. especially when you don't have a test bed.
I put a lot of time into it and encouraged other to share, but you review the thread I posted and the size of contributions.
I believe that what I have written (in the Telecoding Thread) is most of the work, and there is a small piece (probably the code of the car etc..) to finish it.. But then, someone or some others need to put some time into it and test it, to get results.
RE: DiagBox 8.01 Installation - lvlacleod - 26-09-2018
Looks like the thread has been deleted.
(21-09-2018, 17:21 PM)cro1983 Wrote: I get these message when I want open link
Code:Invalid Thread specified. If you followed a valid link,
RE: DiagBox 8.01 Installation - stjansdal - 04-10-2018
Hi
PP2000 is not working.
How to activate it ?
RE: DiagBox 8.01 Installation - davosss - 10-10-2018
I get error "the application failed to initialize properly" and a black screen in diagbox after update 8.11-8.14. Can't figure out why
Nevermind, I had forgotten to install Net Framworks. I wish you could delete your own comment in this forum!