+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Upgrade to esys 3.27.1 for psdzdata 3.58.0500 or newer (/showthread.php?tid=13675)
Upgrade to esys 3.27.1 for psdzdata 3.58.0500 or newer - abuqutaita - 29-02-2016
I flashed with ISTA-P 3.58.0.500 today, and then I tried to use E-Sys 3.26.1 to flash FEM_BODY with some modifications. I saw the following error:
TAL execution started.
VCM Update: VCM-Update is deactivated. VCM will not be updated. [C197]
Fatal error while executing tal!
Asynchrone programming failed! [C049]
task extension configuration missing in container - maybe the template is too old [1906]
[] - [Exception - UNKNOWN] task extension configuration missing in container - maybe the template is too old
On a hunch, I tried 3.27.1, and it worked! I'm making this post hoping that it helps someone else who tries to use E-Sys after flashing with psdzdata 58 or later.
RE: Upgrade to esys 3.27.1 for psdzdata 3.58.0500 or newer - CEBEP - 02-03-2016
Yes, only 3.27.1 works
RE: Upgrade to esys 3.27.1 for psdzdata 3.58.0500 or newer - saharozo - 03-03-2016
Hi, I can not program FRM F 10
RE: Upgrade to esys 3.27.1 for psdzdata 3.58.0500 or newer - KaiO - 03-03-2016
Be more specific, what exactly is the error?