+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=20)
+--- Thread: Wiring room thermostat webasto (/showthread.php?tid=13738)
Wiring room thermostat webasto - ionescudan - 02-03-2016
Have anyone schematic diagram room thermostat webasto,i have mounted
one thermotop T in my van and i want to wiring one thermostat with temperature control.I want to sleep in my car when i make longs trips.
i have buy this thermostat(the 4 model counting from up-down with temperature control)
http://www.webasto.com/int/markets-products/marine/heating-solutions/water-heaters/control-options/
I want to know how i must to conect pins in/out (write on this thermostat12/24V)
have one code write 26537D 12/24V and 9095
thermop i have found schematic diagram,i have 3 wires brown is ground,red is +12V and start heating black(12volts in)
(must red with black and heater start)
RE: Wiring room thermostat webasto - ionescudan - 04-03-2016
I have open the box and search the wires,and result is
brown center is negative for 12 Volt
or if you use 24V is another brown(you will see the power led not light very well when you use 12Volts and brown is no good)
red is +12Volts power
black +12 volts when you push the button(or 1 ,or bad)
and silber wire is output +12volts(you can have a small light bulb to make one try)