BMW E39 EWS Prob.Coding,please Help - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW E39 EWS Prob.Coding,please Help (/showthread.php?tid=14845) |
BMW E39 EWS Prob.Coding,please Help - Addyy - 12-04-2016 Hello, sorry Gys but I hope somebody here can Help me...thanks in advance!!! I have a Problem with my E39 Bmw Year 2000 Its starts in Dezember last year with Car want start and want crank at all.In Inpa I could read error about Change Code for the Key is wrong or Key not recognized or wrong Key password. I by a new Key and Ringantena but the Problem stays. The Car starts for 3 or 4 days and after that the same with the new Key and ringantena. Wen I disconest the conector of the EWS for a wile to make a Power on Reset the Car runs again for a 3 or 4 days and than again the same.It must be some prob with the change code in EWS I think. Now I by a Used EWS3 and make it Virgin so I need some Help to cod it to my Car to Work with it. I make a Backup of Original EWS and put it in the used one with BMW Scanner 1.4. But how I need to put the Key Codes for my Key to work with it. Do I need to code it again or Can I just put the Fixed Code of the Key as shown in the picture.How do I find the Password I need to write in the EWS? Do I need to Lock EWS after all is done? I would realy be Thankful if someone could help me here Thanks in Advance! RE: BMW E39 EWS Prob.Coding,please Help - hamzettin - 12-04-2016 Hello, buy yourself tool and can teach this every ews and also used . EWS 3 can BMW Scanner not only unlock EWS 2 , if you want to apply ews 2 , then you need to make and harness change on static . regards Sorry Link... http://www.diagtools.de/wholesale/ews-editor-version-320-for-bmw.html RE: BMW E39 EWS Prob.Coding,please Help - Addyy - 12-04-2016 Sory Hamzetin but I have everything I need ,I just need to know how to put the Key codes in the EWS with BMW Scanner,it works with this hardware to. RE: BMW E39 EWS Prob.Coding,please Help - hamzettin - 12-04-2016 Hello, you have any connect a ews and read with inpa the current key and then enter . You can also use blanks or take a used ews and your copy and transfer in hand . regards RE: BMW E39 EWS Prob.Coding,please Help - bond1 - 12-04-2016 You need ews editor RE: BMW E39 EWS Prob.Coding,please Help - CATAHA - 13-04-2016 (12-04-2016, 17:48 PM)hamzettin Wrote: Hello,Don't post links in open text on forum Read rules RE: BMW E39 EWS Prob.Coding,please Help - Addyy - 15-04-2016 Thanks for your Replays,today I order EWS Editor as soon as I get it I will try to code my EWS. |