E46 LIGHT SWITCH MODULE Problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: E46 LIGHT SWITCH MODULE Problem (/showthread.php?tid=15013)

E46 LIGHT SWITCH MODULE Problem - Silva1337 - 19-04-2016 Hi all situation is that my old lsz module burn out so i decided to buy used one from another car , i used PASOFT scanner to correct vin and mileage and problem now that i cant read module in ncs to execute coding that i need , im from europe and currently lights works with usa style indicators(they lights all time) switch was from european car too i dont know.. tryed to use "programming" and encoding module with ISTA/P no results just getting red "X" tryed to read with that another mode of reading when using ncs to fix coding index it wont fixes coding index Btw some interesting thing that before old lsz burned out i could see LCM module in ECU list through programs such ista p , rheingold , ncs and now after changing lsz it wont show anymore maybe problem with LCM ? LIGHTS ARE WORKING! im adding few pics what errors i get when using ncs RE: E46 LIGHT SWITCH MODULE Problem - Silva1337 - 26-04-2016 Bumpbumpbumpbump RE: E46 LIGHT SWITCH MODULE Problem - Node - 26-04-2016 Well, I'm not an expert with E46, but first error message suggests your unit is not responding at all. I can just write some guesses. Now you say it was responding before, so points are: 1. Are you sure you've put the replacement unit with the same part number and not just "of similar car"? 2. What cable are you using for connection? My guess would be you are using OBD-K-Line cable and you've actually put a different unit which requires "low bitrate wakeup". PASOFT scanner could be capable of working with such units as it actually has a MCU in it. Update: Not sure about second screenshot. The second error message suggests that unit is responding but you are using LSZ.C34 file for coding index 34, but unit actually has coding index 32. Then you have to use LSZ.C32. I'm confused why it suddenly looks like its responding. RE: E46 LIGHT SWITCH MODULE Problem - betonmichl - 27-04-2016 Sorry for my bad english. I think your problem is missing data in Folder NCS Expert Daten. RE: E46 LIGHT SWITCH MODULE Problem - Node - 27-04-2016 In my opinion missing NCS Daten does not explain why ISTA/P does not work. RE: E46 LIGHT SWITCH MODULE Problem - Silva1337 - 27-04-2016 I made myself everthying was ok , i needed to edit my profile and enable SGET mode and correct file index, it was C32 , as in error it writes that ncs want to read out C34