MB SDconnect C4 LCD Problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Mercedes Benz - Smart (https://cartechnology.co.uk/forumdisplay.php?fid=63) +---- Thread: MB SDconnect C4 LCD Problem (/showthread.php?tid=15040) |
MB SDconnect C4 LCD Problem - vagvag - 20-04-2016 Hi...... I have a YANHUA MB SD Connect Compact 4 (with S/N 155988) with problem in the LCD. The problem for sure is in the chip A3PN010. I have allready change it with another from a used one to check if this was the problem and now i bought a new one and want to read and write the dump file. I bought the Flashpro5 programmer which it is for these FPGA chips but i can not read it. Maybe someone have this dump file or can help me and to show me how i can read/write it? Here some picture from the whole PCB and from the programmer. Thanks in andvance for your help!!!!!! Regarts....... RE: MB SDconnect C4 LCD Problem - taztheman - 14-12-2016 (20-04-2016, 05:18 AM)vagvag Wrote: Hi...... them LCD boards ( exact same as mine ) can be bought on Ali Express, about £50 plus delivery.... I've got XPROG, but I don't have a chip clamp for that IC, i'd have to desolder, which would kill the chip / PCB |