+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW 1 series fault code 2FC1 (/showthread.php?tid=15105)
BMW 1 series fault code 2FC1 - Maverickqwe - 22-04-2016
Hi we have a BMW 2008 n43 1.6 petrol with a fault code of 2FC1 will run rough and stall cant find any info on this code. Also codes 2AF4 2AF6 2AF2 with looks like it needs a new NOX sensor, if the last three codes only in system car runs OK. when it puts 2FC1 in runs rough stalls and no power. when starting this mornnig runs fine again with out doing anything. Any help please.
Regards Tony
RE: BMW 1 series fault code 2FC1 - Node - 22-04-2016
Depending on DME version this code is either "Clutch switch, signal" or "Fuel supply control valve". Based on symptoms its probably the second one.
RE: BMW 1 series fault code 2FC1 - Maverickqwe - 22-04-2016
Sorry should have said it has come up with fuel control valve any idears what fault could be, if we unplug the valve on thye high pressure fuel pumnp we get that same code. Trouble is the car is running again ok with no codes stored
RE: BMW 1 series fault code 2FC1 - Node - 22-04-2016
I would also guess those nitrogen oxide sensors could be a secondary faults due to rail pressure being wrong.
Well, probably valve could be failing electrically or jamming mechanically. If by disconnecting the valve you get the same error, then it means it checks for electrical properties of it. Please find someone with proper BMW diagnostic tools, there would be more info on that error like if its shorted or open or whatever.
BMW 1 series fault code 2FC1 - tohmc - 24-04-2016
I have the Same errors.
The injektors Are the Problem.
Sent from my BMW using M-Power.