BMW Professional programming error - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: BMW Professional programming error (/showthread.php?tid=15649) |
BMW Professional programming error - Strellson - 14-05-2016 Friends, kick in the right direction. BMW Professional after a dead battery is not included. Instead RAD2 block - solid blue CCC-BO. ISTA-P offers to restore the block, but the screen as the user))) Attempts to flash through WinKFP end in failure with a 211 error and the jamb on programming. In expert mode, all the same. 5-7 minutes and unsatisfactory. Climbed over NFS - the outcome is the same: All tribulations are on the ICOM A2, but for OBD. The question is how to raise the radio? And are will ICOM-B help? RE: BMW Professional programming error - SweetBMW - 14-05-2016 You need to use ICOM A + B....... never flash radio \ ccc \cic over OBD \ CAN..... this is the result. RE: BMW Professional programming error - bmw335coding - 16-05-2016 Yes SweetBMW is right, you can read it all, NEVER FLASH CCC/CIC/NBT OVER OBD ONLY WITH ICOM! RE: BMW Professional programming error - Strellson - 16-05-2016 (16-05-2016, 10:15 AM)bmw335coding Wrote: Yes SweetBMW is right, you can read it all, NEVER FLASH CCC/CIC/NBT OVER OBD ONLY WITH ICOM!This is BMW Professional, RAD2! RE: BMW Professional programming error - bimmer71 - 16-05-2016 Try istap w icom a +b alwaya use icom a alone with icom b on any most bus vehicles BMW Professional programming error - bmw335coding - 17-05-2016 (16-05-2016, 11:02 AM)Strellson Wrote:(16-05-2016, 10:15 AM)bmw335coding Wrote: Yes SweetBMW is right, you can read it all, NEVER FLASH CCC/CIC/NBT OVER OBD ONLY WITH ICOM!This is BMW Professional, RAD2! Ouh mate... Youre so clever, see the result. RE: BMW Professional programming error - doktorabg - 17-05-2016 (16-05-2016, 11:02 AM)Strellson Wrote:(16-05-2016, 10:15 AM)bmw335coding Wrote: Yes SweetBMW is right, you can read it all, NEVER FLASH CCC/CIC/NBT OVER OBD ONLY WITH ICOM!This is BMW Professional, RAD2! Never mind that it is RAD2 - there is MOST lines for it too. |