Read 080D0WQ failed with R270 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Read 080D0WQ failed with R270 (/showthread.php?tid=15765) |
RE: Read 080D0WQ failed with R270 - rs@chip - 21-05-2017 Today I was strugling at least one our with one v6 chip from E-serie...no way to erase it.. and I didnt have a new chip at home so I decide to solve this as I no r270 should erase it..I played with configuration of eeprom adaptor and finaly find corect setup which erase it in 12minutes..here is picture for rework which work 100% enjoy RE: Read 080D0WQ failed with R270 - Levanime - 11-06-2017 (21-05-2017, 10:46 AM)alex.eobd2 Wrote: Today I was strugling at least one our with one v6 chip from E-serie...no way to erase it.. and I didnt have a new chip at home so I decide to solve this as I no r270 should erase it..I played with configuration of eeprom adaptor and finaly find corect setup which erase it in 12minutes..here is picture for rework which work 100% enjoy this is very interesting! Alex, i cant read whats written on some of them, could u make notes pls? i have case when it would not even write to v6 chip on non incremental area do u have any idea what to check? RE: Read 080D0WQ failed with R270 - rs@chip - 29-06-2017 (11-06-2017, 04:24 AM)Levanime Wrote:(21-05-2017, 10:46 AM)alex.eobd2 Wrote: Today I was strugling at least one our with one v6 chip from E-serie...no way to erase it.. and I didnt have a new chip at home so I decide to solve this as I no r270 should erase it..I played with configuration of eeprom adaptor and finaly find corect setup which erase it in 12minutes..here is picture for rework which work 100% enjoy yust make rework on this adapter(I checked picture and it is visible) and install 1.20 softwere.. RE: Read 080D0WQ failed with R270 - teerak2uk - 14-07-2017 (21-05-2017, 10:46 AM)alex.eobd2 Wrote: Today I was strugling at least one our with one v6 chip from E-serie...no way to erase it.. and I didnt have a new chip at home so I decide to solve this as I no r270 should erase it..I played with configuration of eeprom adaptor and finaly find corect setup which erase it in 12minutes..here is picture for rework which work 100% enjoySome v6 don't erase for some reason best thing to do is have new blanks for when you need them RE: Read 080D0WQ failed with R270 - ubistvo - 15-07-2017 (21-05-2017, 10:46 AM)alex.eobd2 Wrote: Today I was strugling at least one our with one v6 chip from E-serie...no way to erase it.. and I didnt have a new chip at home so I decide to solve this as I no r270 should erase it..I played with configuration of eeprom adaptor and finaly find corect setup which erase it in 12minutes..here is picture for rework which work 100% enjoy Sorry but WHAT are you change here on board so it work???? I can not see any changes??????? I have the same board and same smd as on your pic What are you do can you teel as?? RE: Read 080D0WQ failed with R270 - rs@chip - 15-07-2017 (15-07-2017, 19:44 PM)ubistvo Wrote:(21-05-2017, 10:46 AM)alex.eobd2 Wrote: Today I was strugling at least one our with one v6 chip from E-serie...no way to erase it.. and I didnt have a new chip at home so I decide to solve this as I no r270 should erase it..I played with configuration of eeprom adaptor and finaly find corect setup which erase it in 12minutes..here is picture for rework which work 100% enjoy did you checked all smd components if they are same values as on picture?If yes than you have alredy corected adapter and dont need to change resistors.. mine was completly diferent and after rework work like a charm but v6 chips take some time before completly erase first lines,last time I wate 15minutes. RE: Read 080D0WQ failed with R270 - ubistvo - 16-07-2017 OK Can someone give me what is next smd on board U9- PCF7991 (I think) Y1- I think 4.000mhz C24 - ? C23- ? JP3 - ? I dont have this on my board Thanks RE: Read 080D0WQ failed with R270 - dj_jormi - 26-09-2017 I have a r270, full works, but i same problem with V6. New chip , resolve this problem. RE: Read 080D0WQ failed with R270 - IZGOY - 26-09-2017 Interesting but it's a fact! I'm washing on a stationary computer !!! on laptops do not rub! RE: Read 080D0WQ failed with R270 - teerak2uk - 30-09-2017 (26-09-2017, 09:46 AM)dj_jormi Wrote: I have a r270, full works, but i same problem with V6. New chip , resolve this problem.Some v6 dont erase so just write to a new chip (16-07-2017, 14:23 PM)ubistvo Wrote: OK. |