CarTechnoloGY
Citroen C5 3v6 Bosch ME 7.4.6 - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: Citroen C5 3v6 Bosch ME 7.4.6 (/showthread.php?tid=15797)

Pages: 1 2

Citroen C5 3v6 Bosch ME 7.4.6 - Wogabun - 20-05-2016

Hi
I need to make a copy of the ECU , where the memory which can be soldered?

RE: Citroen C5 3v6 Bosch ME 7.4.6 - CHIKODIAG - 20-05-2016

HI IN BOSCH 7.4.6 YOU FOND 25C15 OR 95160
GOOD LUAK
SORY AND 29F400 IF YOU WANT IMMO OFF

RE: Citroen C5 3v6 Bosch ME 7.4.6 - Wogabun - 20-05-2016

OK I see 25C16 eeprom , I not want immo OFF , change 25C16 make clone ECU ?

RE: Citroen C5 3v6 Bosch ME 7.4.6 - CHIKODIAG - 20-05-2016

HI. OK CHANGE THE EEPROM IF THE CAR DONT START CHANGE THE 29F400
GOOD LUK

RE: Citroen C5 3v6 Bosch ME 7.4.6 - Wogabun - 20-05-2016

OK I read old ECU and write to new , eeprom and 29F400 , I have problem with TPM , sometimes it works and sometimes has errors . śimply unplug , plug and starts to work TPM I do not know why but it was only me to change ECU

RE: Citroen C5 3v6 Bosch ME 7.4.6 - CHIKODIAG - 20-05-2016

SORY BUT TPM IS NOT TYRE PRESSURE MONITORT?

RE: Citroen C5 3v6 Bosch ME 7.4.6 - Wogabun - 20-05-2016

Yes my mistake
Accelerator Pedal Position Sensor not work good

RE: Citroen C5 3v6 Bosch ME 7.4.6 - CHIKODIAG - 20-05-2016

OK GOOD LUAK AND DONT FORGET TO CHEK WAIRS

RE: Citroen C5 3v6 Bosch ME 7.4.6 - zmann - 21-05-2016

(20-05-2016, 19:22 PM)Wogabun Wrote:  OK I read old ECU and write to new , eeprom and 29F400 , I have problem with TPM , sometimes it works and sometimes has errors . śimply unplug , plug and starts to work TPM I do not know why but it was only me to change ECU

Accelerator Pedal Position Sensor problem is only with the cloned ECU? How is this problem with the original ECU?

RE: Citroen C5 3v6 Bosch ME 7.4.6 - Wogabun - 15-02-2017

(21-05-2016, 03:14 AM)zmann Wrote:  
(20-05-2016, 19:22 PM)Wogabun Wrote:  OK I read old ECU and write to new , eeprom and 29F400 , I have problem with TPM , sometimes it works and sometimes has errors . śimply unplug , plug and starts to work TPM I do not know why but it was only me to change ECU

Accelerator Pedal Position Sensor problem is only with the cloned ECU? How is this problem with the original ECU?
Ogrinal and clone ECU , I change sensor and nothing change