Is programming with ISTA-P including ENET-cable safe? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Is programming with ISTA-P including ENET-cable safe? (/showthread.php?tid=15833) |
Is programming with ISTA-P including ENET-cable safe? - Bimmer540 - 22-05-2016 I want programming GWS from BMW F01 2008 with ISTA-P (Beemerboy loader) including ENET-cable, but is it safe? Or is it best to use ICOM. RE: Is programming with ISTA-P including ENET-cable safe? - BMWdriva - 22-05-2016 (22-05-2016, 12:19 PM)snypertje Wrote: I want programming GWS from BMW F01 2008 with ISTA-P (Beemerboy loader) programming e-sys ENET-cable RE: Is programming with ISTA-P including ENET-cable safe? - winter - 22-05-2016 (22-05-2016, 12:19 PM)snypertje Wrote: I want programming GWS from BMW F01 2008 with ISTA-P (Beemerboy loader) Yes.ENET cable is totally support ISTA-P with loader,but only except for optical modules,for example,HU-H,KOMBI... RE: Is programming with ISTA-P including ENET-cable safe? - Bimmer540 - 23-05-2016 (23-05-2016, 07:47 AM)lalaura Wrote: It is definitely ok to program F series with ENET cable and E-sys program I want programming with ISTA-P? RE: Is programming with ISTA-P including ENET-cable safe? - Tom329 - 23-05-2016 (22-05-2016, 13:45 PM)winter Wrote:(22-05-2016, 12:19 PM)snypertje Wrote: I want programming GWS from BMW F01 2008 with ISTA-P (Beemerboy loader) Any other disadvantages? RE: Is programming with ISTA-P including ENET-cable safe? - InAndAround - 23-05-2016 (22-05-2016, 13:45 PM)winter Wrote: Yes.ENET cable is totally support ISTA-P with loader,but only except for optical modules,for example,HU-H,KOMBI... F series BMW's don't have any diagnostic optical connection, just ENET thru the OBD2 socket. The problem with the HU-H/Kombi modules programing fails is the lack of an DHPC server on the network. |