Yamaha R6 RJ09 Odometer - Printable Version

Yamaha R6 RJ09 Odometer - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: Yamaha R6 RJ09 Odometer (/showthread.php?tid=15997)

Pages: 1 2 3 4

Yamaha R6 RJ09 Odometer - bmw335coding - 30-05-2016

Hi guys,

which eeprom has the dashboard from an Yamaha R6 RJ09 from 2004?

Is it a 93c56?!

Which correction tool works good and is not so expensive?

have already a r270, but this supports not the eeprom.

RE: Yamaha R6 RJ09 Odometer - rs@chip - 01-06-2016

I think upa 1.3 is best option for you...

RE: Yamaha R6 RJ09 Odometer - bmw335coding - 01-06-2016

(01-06-2016, 09:29 AM)alex.eobd2 Wrote: I think upa 1.3 is best option for you...

price for UPA USB Programmer is about 75€ with shipping to germany.
What do you think about an digiprog 3 clone? price is about 110 euros, but supports more eeprom and standalone?
or x-prog clone?

RE: Yamaha R6 RJ09 Odometer - rs@chip - 01-06-2016

Depend what you need..Iven for milage only you steel need upa becouse you cant do all by digiprog

RE: Yamaha R6 RJ09 Odometer - bmw335coding - 04-06-2016

(01-06-2016, 10:45 AM)alex.eobd2 Wrote: Depend what you need..Iven for milage only you steel need upa becouse you cant do all by digiprog

Your PM quota is full, please clean your messages.

RE: Yamaha R6 RJ09 Odometer - bmw335coding - 16-07-2016

Problem now:

When i open the dashboard the eeprom is under LCD-Display, which is soldered with more than 20 wires.

Has anyone an wiring plan, where i can find the eeprom pins on other side?

Thanks.

RE: Yamaha R6 RJ09 Odometer - Clusters - 16-07-2016

Have a look at this....

RE: Yamaha R6 RJ09 Odometer - bmw335coding - 16-07-2016

(16-07-2016, 13:02 PM)clusters Wrote: Have a look at this....

Big big thanks to you! You're my daily hero cheers

The numbers are same with this X-Prog wiring diagramm?

RE: Yamaha R6 RJ09 Odometer - Clusters - 16-07-2016

Yes they are the chip leg numbers.

RE: Yamaha R6 RJ09 Odometer - bmw335coding - 21-07-2016

(16-07-2016, 17:22 PM)clusters Wrote: Yes they are the chip leg numbers.

Problem now;

in X-PROG there are the pin numbers B0,B1,B2,B3,B4,B5,B6,B7.

In your ENIGMA diagram there a pin numbers 1,2,3,4,5,8.

I connect B0 with 1, B1 with 2, B3 with 4, B4 with 5 and B7 with 8.

I try to read with x-prog and he says "error bad connection at pin 6."

Is my wiring wrong?