+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: 【
PEUGEOT/CITROEN eMyway WipCom+ (RT6) Europa 2013/2014 - alba1 - 11-01-2014
Installation via USB
Copy the contents of the folder obtained by unpacking a USB stick formatted in FAT32 empty
Insert the USB pendrive nalla , the update process will start automatically
Select one of the maps and choose update
After a while, the system will show the list again from where you selected the map before
If you want to repeat the procedure for the other maps
Those already up to date will be reported as " up to date"
WARNING !
It is not yet clear about the situation of the request for an activation code
It would seem that only holds true for Citroen and it is tied to the version of FW ,
from v2.10 onwards would be required activation
So I highly recommend you DO NOT upgrade firmware before doing the map update
and even later to avoid future problems ...
This speech does not seem to be valid for Peugeot
that they would accept the request without updating the code regardless of FW version
OPERATIONS MUST BE MADE WITH THE ENGINE RUNNING BUT NOT MOVING
DO NOT TURN OFF THE ENGINE DURING INSTALLATION
Don't forget thanks and reputation button
