ICOM NEXT Firmware FW-3.14.10 released - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ICOM NEXT Firmware FW-3.14.10 released (/showthread.php?tid=17603) |
ICOM NEXT Firmware FW-3.14.10 released - Jynkky - 15-08-2016 New firmware for ICOM-Next-FW-3.14.10 released. RE: ICOM NEXT Firmware FW-3.14.10 released - cryptocar - 16-08-2016 For those who want to update via web interface here are the files from OP's .msi Don't forget to Thanks, Rep, and Like OP! RE: ICOM NEXT Firmware FW-3.14.10 released - jeroenbmw - 16-08-2016 I test it this morning on a CIC of a E90 and E60 And now also ICOM NEXT is flashing like HELL so the bug of slow flashing CICR is gone with this upgrade, that i can confirm THANK, it was long waiting but it was worth it. RE: ICOM NEXT Firmware FW-3.14.10 released - ipcsr76 - 18-08-2016 Hello It's just for new ICOM NEXT or OLD ICOM A1? Thanks RE: ICOM NEXT Firmware FW-3.14.10 released - M-Simon - 18-08-2016 Only for ICOM next. RE: ICOM NEXT Firmware FW-3.14.10 released - Paul - 18-08-2016 Do Icom Next now work with IstaP without BB88 Loader? RE: ICOM NEXT Firmware FW-3.14.10 released - Dren1977 - 18-08-2016 (18-08-2016, 07:41 AM)Paul Wrote: Do Icom Next now work with IstaP without BB88 Loader? It has always worked. Just needs correct license. No need to use loader. RE: ICOM NEXT Firmware FW-3.14.10 released - Darmand - 23-08-2016 Hi Update of FW didn't speed things up here. CIC is going real slow - with MOST in WinKfp. Updte started like 4 hours ago.... Wtf.. RE: ICOM NEXT Firmware FW-3.14.10 released - Jynkky - 25-08-2016 (23-08-2016, 19:29 PM)Darmand Wrote: Hi Intresting. Have u configure your icom next to ispi next mode? RE: ICOM NEXT Firmware FW-3.14.10 released - SCOTT - 25-08-2016 (18-08-2016, 07:41 AM)Paul Wrote: Do Icom Next now work with IstaP without BB88 Loader? Actually ista/p never needed a B888's loader , it has aways worked without it. |