Is it possible to code out tpms on 2007 328xi? - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Is it possible to code out tpms on 2007 328xi? (/showthread.php?tid=17616) |
Is it possible to code out tpms on 2007 328xi? - freshazfuk - 16-08-2016 I recently had that pop up as a tpms malfuntion....i checked all my tires and there good ....is there anyway to code out that sensor???/get back to me asap tia RE: Is it possible to code out tpms on 2007 328xi? - diagnosiks - 16-08-2016 (16-08-2016, 09:49 AM)freshazfuk Wrote: I recently had that pop up as a tpms malfuntion....i checked all my tires and there good ....is there anyway to code out that sensor???/get back to me asap tia Yes it is In KOMBI set "RDC_ALIVE." to not active and maybe remove TPMS from VO. This can all be done with NCS. BR RE: Is it possible to code out tpms on 2007 328xi? - bazare - 16-08-2016 Depending on what idrive system you have maybe you need to code some more. You have a CCC or a CIC? Both were available in 2007 RE: Is it possible to code out tpms on 2007 328xi? - gt678 - 16-08-2016 Delete "2VB" from FA, unplug the RDC ECU and code KOMBI, CCC and DSC. RE: Is it possible to code out tpms on 2007 328xi? - Studie - 07-09-2016 Disconnect module first. Then remove 2VB from the FA/VO. Expertmode car completely OR SG_codieren and code the DSC, KOMBI and NFRM modules. (For M3 cars it would be M3DSC). CAPPL/CIC is also needed to be coded if you have a navigation. |