+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: BMW e93 coding issue (/showthread.php?tid=17826)
BMW e93 coding issue - szr - 28-08-2016
Hello,
I tryed to code my e93 335i today to folding roof while driving.
I need to change GESCHWINDIGKEIT value (default werte_02 (00km/h) ) to 1eh (30km/h)
I must code it via nettodata and I never did this. Can someone give me a quick how to do instuctions?
Also I tryed to code my hazard lights to double blink. I have tryed to change the werte to werte_03 but it seems to not working.
RE: BMW e93 coding issue - Bimmer540 - 28-08-2016
CTM/CVM module in order to operate roof while driving (in motion):
The line that needs to be change is GESCHWINDIGKEIT
default should be wert_02 (which is 00 km/h)
After using NCSDummy you can change it to the following values
32 = 50km/h (which i think is way too high, but it's your call)
1eh = 30km/h
14h = 20km/h
RE: BMW e93 coding issue - szr - 28-08-2016
(28-08-2016, 15:16 PM)snypertje Wrote: CTM/CVM module in order to operate roof while driving (in motion):
The line that needs to be change is GESCHWINDIGKEIT
default should be wert_02 (which is 00 km/h)
After using NCSDummy you can change it to the following values
32 = 50km/h (which i think is way too high, but it's your call)
1eh = 30km/h
14h = 20km/h
Thanks for you reply, but its just copy past from monero1 post from e90forun. Also you can't change parameters like you change activr- nicht active choices. Also when I load trace file I only can choice 2 values. Thats why i need to do nettodata coding.
RE: BMW e93 coding issue - lowtrade - 29-08-2016
Use the NCSDummy and load the nettodat file to change the value.