Solved ✔ HELP!---BMW 645i. 2004. Ignition. coil burning - - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: Solved ✔ HELP!---BMW 645i. 2004. Ignition. coil burning - (/showthread.php?tid=18337) |
HELP!---BMW 645i. 2004. Ignition. coil burning - - bursuc - 19-09-2016 Hello all. CT friends I have a problem with this bmw. Every time i try to start it happends to burn an ignition coil. I attach picture. Ecu was a bit water damage I get a different one. Still doing the same. Ignition coils get hot and hot and car not starting Anyoane experience this ? Thank you Regards Sent from my SM-G928F using Tapatalk And the fuse for ignition coils is somethimes burning .... 8 am stumped and dont know where to go from here Sent from my SM-G928F using Tapatalk RE: HELP!---BMW 645i. 2004. Ignition. coil burning - - kakaka - 19-09-2016 Replace DME or repair DME IGBT fault RE: HELP!---BMW 645i. 2004. Ignition. coil burning - - troubleshooter - 24-10-2016 Always cilinder 7? photo's of ecu connector? RE: HELP!---BMW 645i. 2004. Ignition. coil burning - - Rhyno92 - 26-10-2016 Oh my god!!! Try to unplug this coil and than start the car. if you post any information of car and dme i try to find wiring diagrams. RE: HELP!---BMW 645i. 2004. Ignition. coil burning - - jaki - 27-10-2016 Is it only in Cyl 7? If so, have you checked that sprak plug is ok? Well, replace those (all) anyway for secure. RE: HELP!---BMW 645i. 2004. Ignition. coil burning - - troubleshooter - 29-10-2016 (27-10-2016, 12:06 PM)jaki Wrote: Is it only in Cyl 7? i never had a blown coil from a bad sparkplug, this is hapening because of high / long time current true the coil(s) RE: HELP!---BMW 645i. 2004. Ignition. coil burning - - bursuc - 01-11-2016 Sorted up. Wiring short circuit on the wires that go to ignition coil and DME burnt thanks all Sent from my SM-G928F using Tapatalk |