EDC16C34 advice - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CHIPTUNING (https://cartechnology.co.uk/forumdisplay.php?fid=12) +--- Thread: EDC16C34 advice (/showthread.php?tid=18588) Pages:
1
2
|
EDC16C34 advice - jpbroad1970 - 30-09-2016 Hi can someone please give me some advice I have a citroen C4 1.6 hdi 110 non fap 2008 it has the edc16c34 bosch ecu. I purchased a china clone galletto lead to do remap.....is it possible on these ecu's without removing them. I have read rightly or wrongly that it can wipe injector codes and allsorts out as it doesn't take a complete copy of ecu the other option im thinking of is getting another ecu off another c4 and try to reflash with immobilser removed egr removed and a tuned file . does that make any sense possible or not thanks in advance, just don't fancy bricking my car John RE: EDC16C34 advice - teamtuner - 30-09-2016 (30-09-2016, 11:46 AM)jpbroad1970 Wrote: Hi you can use without problem read-write by obd this ecu...it will read-write only flash RE: EDC16C34 advice - jpbroad1970 - 30-09-2016 (30-09-2016, 12:07 PM)teamtuner Wrote:(30-09-2016, 11:46 AM)jpbroad1970 Wrote: Hi thanks very much I will read my ecu and post if anyone can help RE: EDC16C34 advice - jpbroad1970 - 30-09-2016 Have just tried reading, it gets to 50% comes up with a message to switch on and off but has an error code errore dati1 -8 any ideas RE: EDC16C34 advice - teamtuner - 30-09-2016 (30-09-2016, 15:06 PM)jpbroad1970 Wrote: Have just tried reading, it gets to 50% comes up with a message to switch on and off but has an error code errore dati1 -8 maybe need to select your ecu nk-line whan said switch off...you do this and wait until it said switch on...is moment that recode injectors RE: EDC16C34 advice - jpbroad1970 - 30-09-2016 I still can't get it to read , I'm using galletto 1260 so I'm thinking that's not working right. Still the same error perhaps it's to old . I select my ecu but it still fails, sad times RE: EDC16C34 advice - ROD-BENDERS - 30-09-2016 (30-09-2016, 19:03 PM)jpbroad1970 Wrote: I still can't get it to read , I'm using galletto 1260 so I'm thinking that's not working right. Still the same error perhaps it's to old . I select my ecu but it still fails, sad times Dont use 1260 get a 54 clone ok RE: EDC16C34 advice - teamtuner - 01-10-2016 (30-09-2016, 20:48 PM)Buzzard Wrote:uhhh..too much money for tune a car.......better to send to a tunner to do this job...(30-09-2016, 19:03 PM)jpbroad1970 Wrote: I still can't get it to read , I'm using galletto 1260 so I'm thinking that's not working right. Still the same error perhaps it's to old . I select my ecu but it still fails, sad times RE: EDC16C34 advice - jpbroad1970 - 01-10-2016 I've ordered mpps spent more money lol. So hopefully that will work RE: EDC16C34 advice - teamtuner - 01-10-2016 (01-10-2016, 13:22 PM)jpbroad1970 Wrote: I've ordered mpps spent more money lol. So hopefully that will work more money?...15 euro? mate...take kess or fgtech 5.4... |