Solved ✔ Opel Vivaro 2.5 146hp 2008 on edc16c36 pin out - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: Opel - Vauxhall - Holden (https://cartechnology.co.uk/forumdisplay.php?fid=59) +---- Thread: Solved ✔ Opel Vivaro 2.5 146hp 2008 on edc16c36 pin out (/showthread.php?tid=18783) |
Opel Vivaro 2.5 146hp 2008 on edc16c36 pin out - maciek007 - 14-10-2016 Hi, I have an Opel Vivaro 2.5 146hp 2008 on edc16c36 ecu module, problem is that the car won't like to start engine. No communication with the engine controller. There are a common errors in abs and immo system No communication with ECM fault DF066 or U0180. I would like to check the cables from ecu to bcm but I have not got this diagram. Maybe someone has pin out diagram for ECU ? any other ideas what it could be ? RE: Opel Vivaro 2.5 146hp 2008 on edc16c36 pin out - maciek007 - 15-11-2016 Replacing ECU solved the problem. |