+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: E90 IHKA help... (/showthread.php?tid=18861)
E90 IHKA help... - Sensible_ - 17-10-2016
Hi,
I had a friend bring me his 05/2007 E90 today. He got it cheap and has retrofitted a CCC. However, there are now faults with the IHKA, I'm stumped, anyone here an expert with the air con system to save him a trip to the dealer?
Symptoms:
- No air coming from any front vent
- Warm air blasting out from vents out of back of centre console. Never gets cold with air con on.
- When I up the fan speed I can hear the blower responding. Just air isn't getting out.
What I've checked:
- Fuses. All good.
- Coding. Reset to default.
- Wiring. Nothing obvious but only have limited vision.
- ISTA D - All flaps out of range at 255%. I guess not responding.
- 12v at connector to blower.
- From what I can see the CCC retrofit seems good. Coded to car etc etc. Dash seems installed correctly.
Fault Codes:
Heating / AC:
<--------------------------->
Air conditioning / Klimaanlage:
- Fault: Central control timeout
- Code: 009C48
- Fault: Mixed air damper law LIN
- Code: 009C49
- Fault: Fresh air / recirculation / air flow flap LIN
- Code: 009C4A
- Fault: Defrost flap LIN
- Code: 009C4B
- Fault: Footwell flap LIN
- Code: 009C4C
- Fault: Layering flap LIN
- Code: 009C4E
- Fault: Rear ventilation flap LIN
- Code: 009C50
- Fault: Rear ventilation flap LIN
- Code: 009C52
Any help appreciated. I'm out of my league with this...
RE: E90 IHKA help... - zeronoo - 17-10-2016
Vin of the car? maybe the car dont have automatic air con...
RE: E90 IHKA help... - Sensible_ - 18-10-2016
Hi,
VIN is KN65174
It has auto air con. Just after CCC retrofit no longer working. How are flap motors connected? Direct to IHKA on a LIN or IHKA -> JBE -> Flap motors ???
RE: E90 IHKA help... - vlv-ufa - 18-10-2016
They are connected directly to IHKA (power, ground and LIN)
RE: E90 IHKA help... - Sensible_ - 18-10-2016
Thanks!
Found the problem.
Faulty white connector on the back of the IHKA panel. Replaced and repinned connector and all is well.