Update RNS315 Europe V8 EAST - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14) +--- Thread: Update RNS315 Europe V8 EAST (/showthread.php?tid=19023) |
Update RNS315 Europe V8 EAST - benyclaudiu - 24-10-2016 1. Links to maps for RNS315 V8 East Europe. https://www.youtube.com/watch?v=NoPuuJI2BiA&feature=youtu.be 1 - Card EVO + (I tried 32G and 64G SD) 2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected) 3 - Install Ubuntu 32/64 (64's what I used) 4 - Copy local (Desktop linux) folder VW 5 - open the copied folder and right cick -> "open terminal" 6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x". If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64. And the rights and check the "ll" 7 - Insert the SD slot. Terminal command "df" and verify the name card. Somewhere down everything must occur "mmcblk0" + p + a number. The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0". CID To read the original SD: cat / sys / block / mmcblk0 / device / cid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 8 - Order To change CID terminal: - Linux 32 sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 - Linux 64 sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 After this command will display: Writing new CID: 5d53424c32424d31013917ca53010400 Success! Remove and Reinsert SD card to check new CID. To read the SD CID changed: SD disassemble and remove it from the linux PC SD reader, and then paste it into the PC cat / sys / block / mmcblk0 / device / cid will be displaying the new CID 5d53424c32424d31013917ca53010400 9 - To lock SD terminal command: - For Linux 32 sudo ./mmc32 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 - For Linux 64 sudo ./mmc64 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 After this command will display: SEND_STATUS response: 0x00000900 Remove the card and fuguta car ..! 1. Link to download the content of the maps for RNS315 V8 East Europe. https://archive.org/details/RNS315 here you and .zip torrent OR https://ufile.io/eba56 2.You Need a Linux (Ubuntu) PC with integrated SD card reader. Linux 64bit 3.Only works with Samsung EVO + SD (Red One) Steps: Extract and copy the content on the SD top folder is navpsf_update Look under / dev to see SD is yours Which, in my case it is mmcblk0 Copy folder on Desktop Linux and open folder CID VW Right click here and select "open terminal" In the "terminal" put command: sudo -s Change the execution rights: chmod 777 mmc32 or chmod 777 mmc64 if you have 32 or if you have linux linux 64 Read original CID cat / sys / block / mmcblk0 / device / cid After this display original Will CID command: xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Change the CID with the attached tool Password command you know from Below: - For Linux 32 sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 - For Linux 64 sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 After this command Will display: Writing new CID: 5d53424c32424d31013917ca53010400 Success! Remove and Reinsert SD card to check new CID. Reinsert the card and remove it Read new CID cat / sys / block / mmcblk0 / device / cid After this command Will new CID display: 5d53424c32424d31013917ca53010400 Now lock the card by password, it's not possible to unlock it with normal MMC Driver, You Need a patched version of the kernel to be Able to unlock it. Password command you know from Below: - For Linux 32 sudo ./mmc32 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 - For Linux 64 sudo ./mmc64 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 After this command Will display: SEND_STATUS response: 0x00000900 Enjoy your new maps! http://richard.burtons.org/2016/07/31/cid-change-on-sd-card-update-evoplus_cid/ https://www.youtube.com/watch?v=tbWXsSaAb2M#t=467.63458 https://www.youtube.com/watch?v=DBl1H8CKJYY "thanks" or "Add a reputation" RE: Update RNS 315 - benyclaudiu - 27-10-2016 Torrent VW RNS 315 West Europe V8 VW RNS 315 West Europe V8_20161016_archive.torrent Translate Turn off instant translation 1 - Card EVO + (I tried 32G and 64G SD) 2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected) 3 - Install Ubuntu 32/64 (64's what I used) 4 - Copy local (Desktop linux) folder VW 5 - open the copied folder and right click -> open terminal 6 - check with the command execution rights "ll". s14.postimg.org/79vzrwus1/Screenshot_from_2016_10_07_17_00_20.png You must have attributes besides "r", "w" and a "x". If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64. And the rights and check the "ll" s10.postimg.org/tuhwmw715/Screenshot_from_2016_10_07_16_52_28.png http://s14.postimg.org/79vzrwus1/Screenshot_from_2016_10_07_17_00_20.png 7 - Insert the SD slot. Terminal command "df" and verify the name card. Somewhere below all must appear / dev / mmcblk0p1, if you appear / dev / sdb1 is not good PC / Laptop and you can not change the CID. The suffix p "number" is the partition on the card, we are not interested, just use "/ dev / mmcblk0". CID To read the original SD: cat / sys / block / mmcblk0 / device / cid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 8 - To change the CID command in Terminal: - Linux 32 sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 - Linux 64 sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 Writing new CID: 5d53424c32424d31013917ca53010400 Success! Remove and Reinsert SD card to check new CID. To read the SD CID changed: SD disassemble and remove it from the linux PC SD reader, and then paste it into the PC cat / sys / block / mmcblk0 / device / cid will be displaying the new CID 5d53424c32424d31013917ca53010400 9 - To lock the SD command in Terminal: - For Linux 32 sudo ./mmc32 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 - Linux 64 sudo ./mmc64 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 "thanks" or "Add a reputation" RE: Update RNS310 Europe V8 EAST - benyclaudiu - 01-11-2016 Klone mikroSDHC_SDXC for RNS-310 FX Eastern Europe 2016 V8 SD card Core countries: Detailed maps for: Austria, Croatia, Czech Republic, Estonia, Germany, Greece, Hungary, Latvia, Liechtenstein, Lithuania, Poland, Russia, Slovakia, Slovenia, Switzerland, Turkey Maps with the road network leading to: Albania, Belarus, Bosnia-Herzegovina, Bulgaria, Macedonia, Moldova, Montenegro, Romania, Serbia, Ukraine Enjoy the new maps! 1 - Card EVO + (I tried 32G and 64G SD) 2 - FAT32 formatted card (in Windows) and copy kriptnav in rrot (corrected) 3 - Install Ubuntu 32/64 https://www.ubuntu.com/download/desktop 4 - Copy local (Desktop linux) folder CID 5 - You open the copied folder and right cick -> open terminal 6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x". If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64. And the rights and check the "ll" 7 - Insert the SD slot. Terminal command "df" and verify the name card. Somewhere down everything must occur "mmcblk0" + p + a number. The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0". CID To read the original SD: cat / sys / block / mmcblk0 / device / cid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 8 - To change CID terminal command: - Linux 32 sudo ./mmc32 prog_cid / dev / mmcblk0 0941504146205344021349037f00fa00 - Linux 64 sudo ./mmc64 prog_cid / dev / mmcblk0 0941504146205344021349037f00fa00 Writing new CID: 0941504146205344021349037f00fa00 Success! Remove and Reinsert SD card to check new CID. Samsung EVO PLUS 32 Gb MB-SC32D/?? MB-MC32DA/?? To read the SD CID changed: SD disassemble and remove it from the linux PC SD reader, and then paste it into the PC cat / sys / block / mmcblk0 / device / cid will be displaying the new CID 0941504146205344021349037f00fa00 without lock sd You should see 0941504146205344021349037f00fa00 line. The last two characters may be different, for example, be 01. No matter. The main thing is that the first 30 characters are the same. "thanks" or "Add a reputation" RE: Update RNS315 Europe V8 EAST - benyclaudiu - 02-11-2016 Information collected from various forums about models of Nokia phones that are able to revive the microSD card after updating the firmware They successfully formatted phonebook: Nokia E71 - Symbian S60 v9.2 Nokia E72 - Symbian S60 V9.3 Nokia 6220 - Symbian S60 V9.3 Nokia E51 - Symbian S60 v9.2 Nokia E52 - Symbian S60 V9.3 Nokia N82 - Symbian S60 v9.2 Nokia N97 - Symbian S60 v9.4 Nokia C5 - Symbian S60 V9.3 Nokia 5800 XpressMusic - Symbian S60 v9.4 Nokia 701 - Symbian Belle Nokia 6220 - Symbian S60 V9.3 Nokia 5230 - Symbian S60 v9.4 Do not format the card on mobile: Nokia E65 - Symbian S60 V9.1 Nokia E61i - Symbian S60 V9.1 RE: Update RNS315 Europe V8 EAST - tomek2k1 - 05-11-2016 Does anyone know how to calculate the password for other CIDs than the original one? Would love to write software to create the cards with a much more easy way than this one. RE: Update West Europe 2016 V8 for RNS-310 - benyclaudiu - 05-11-2016 Rule 3: Do not Post Links on the Board! External links must be attached in a text file. Thanks, Admin Like this CID 0941504146205344021383518c010100 RE: Update RNS315 Europe V8 EAST - jokir - 09-11-2016 RNS 315 Can not overwrite CID Where did I go wrong ? SD card - samsung evo+ 32gb Writing new CID. ioctl:Invalid or incomplete multibyte or wide character THX RE: Update RNS315 Europe V8 EAST - benyclaudiu - 10-11-2016 Jokir Maps for RNS315 V8 East Europe. 1 - Card EVO + (I tried 32G and 64G SD) 2 - FAT32 formatted card (in Windows) and copy navpsf_update in rrot (corrected) 3 - Install Ubuntu 32/64 (64's what I used) 4 - Copy local (Desktop linux) folder VW 5 - You open the copied folder and right cick -> open terminal 6 - check with the command execution rights "ll". You must have attributes besides "r", "w" and a "x". If there is an X writes: "chmod 777 mmc32" linux if you have 32 or "chmod 777 mmc64" if you have linux 64. And the rights and check the "ll" 7 - Insert the SD slot. Terminal command "df" and verify the name card. Somewhere down everything must occur "mmcblk0" + p + a number. The suffix p "number" is the partition on the card, we are not interested, just use "mmcblk0". CID To read the original SD: cat / sys / block / mmcblk0 / device / cid xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx 8 - To change CID terminal command: - Linux 32 sudo ./mmc32 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 - Linux 64 sudo ./mmc64 prog_cid / dev / mmcblk0 5d53424c32424d31013917ca53010400 Writing new CID: 5d53424c32424d31013917ca53010400 Success! Remove and Reinsert SD card to check new CID. To read the SD CID changed: SD disassemble and remove it from the linux PC SD reader, and then paste it into the PC cat / sys / block / mmcblk0 / device / cid will be displaying the new CID 5d53424c32424d31013917ca53010400 9 - To lock SD terminal command: - For Linux 32 sudo ./mmc32 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 - For Linux 64 sudo ./mmc64 lock_sd / dev / mmcblk0 C99A20843ED7D90B6801E49F2BC80277 Remove the card and fuguta car ..! Samsung Card are other evenings not possible to change CID I used an Asus leptop ProBook 4530s RE: Update RNS315 Europe V8 EAST - jokir - 10-11-2016 I acted according to the instructions Samsung EVO + 32gb - red color MB-MC32D MBMCBGVEDFCW-PKPANA24AW640 Made in Philippines PC HP Pavilion DV6700 32 bit Instal Linux evdo@evdo-HP ~/Plocha/VW $ sudo su [sudo] heslo pre používateľa evdo: evdo-HP VW # ll celkom 604 drwxr-xr-x 2 evdo evdo 4096 okt 6 16:53 ./ drwxr-xr-x 3 evdo evdo 4096 nov 9 17:20 ../ -rw-r--r-- 1 evdo evdo 5050 okt 21 12:45 how_to_RNS315.txt -rwxrwxrwx 1 evdo evdo 240248 sep 16 00:00 mmc32* -rw-r--r-- 1 evdo evdo 357679 sep 9 20:46 mmc64 evdo-HP VW # chmod 777 mmc32 evdo-HP VW # ll celkom 604 drwxr-xr-x 2 evdo evdo 4096 okt 6 16:53 ./ drwxr-xr-x 3 evdo evdo 4096 nov 9 17:20 ../ -rw-r--r-- 1 evdo evdo 5050 okt 21 12:45 how_to_RNS315.txt -rwxrwxrwx 1 evdo evdo 240248 sep 16 00:00 mmc32* -rw-r--r-- 1 evdo evdo 357679 sep 9 20:46 mmc64 evdo-HP VW # df Súborový systém 1K-bloky Použ Dostupné Pou% Pripojený na udev 1011680 0 1011680 0% /dev tmpfs 206128 6556 199572 4% /run /dev/sda6 7557288 6053296 1097056 85% / tmpfs 1030636 208 1030428 1% /dev/shm tmpfs 5120 12 5108 1% /run/lock tmpfs 1030636 0 1030636 0% /sys/fs/cgroup /dev/sda5 463844 57761 377616 14% /boot /dev/sda8 8011960 2750228 4831704 37% /home cgmfs 100 0 100 0% /run/cgmanager/fs tmpfs 206128 36 206092 1% /run/user/1000 /dev/mmcblk0p1 31263744 2916608 28347136 10% /media/evdo/KARTA evdo-HP VW # cat /sys/block/mmcblk0/device/cid 1b534d3030303030105c4d5772010a00 evdo-HP VW # sudo ./mmc32 prog_cid /dev/mmcblk0 5d53424c32424d31013917ca53010400Writing new CID. ioctl: Invalid or incomplete multibyte or wide character evdo-HP VW # PC ASUS X550C 64bit Linux live ubuntu@ubuntu:~/Desktop/VW$ sudo su root@ubuntu:/home/ubuntu/Desktop/VW# ll total 596 drwxrwxr-x 2 ubuntu ubuntu 100 Nov 10 15:04 ./ drwxr-xr-x 3 ubuntu ubuntu 120 Nov 10 15:03 ../ -rw-r--r-- 1 ubuntu ubuntu 5050 Oct 21 12:45 how_to_RNS315.txt -rw-r--r-- 1 ubuntu ubuntu 240248 Sep 16 00:00 mmc32 -rwxrwxrwx 1 ubuntu ubuntu 357679 Sep 9 20:46 mmc64* root@ubuntu:/home/ubuntu/Desktop/VW# chmod 777 mmc64 root@ubuntu:/home/ubuntu/Desktop/VW# ll total 596 drwxrwxr-x 2 ubuntu ubuntu 100 Nov 10 15:04 ./ drwxr-xr-x 3 ubuntu ubuntu 120 Nov 10 15:03 ../ -rw-r--r-- 1 ubuntu ubuntu 5050 Oct 21 12:45 how_to_RNS315.txt -rw-r--r-- 1 ubuntu ubuntu 240248 Sep 16 00:00 mmc32 -rwxrwxrwx 1 ubuntu ubuntu 357679 Sep 9 20:46 mmc64* root@ubuntu:/home/ubuntu/Desktop/VW# df Filesystem 1K-blocks Used Available Use% Mounted on udev 1950292 0 1950292 0% /dev tmpfs 392992 6308 386684 2% /run /dev/sdb1 3805184 1495584 2309600 40% /cdrom /dev/loop0 1399936 1399936 0 100% /rofs /cow 1964940 57796 1907144 3% / tmpfs 1964940 140 1964800 1% /dev/shm tmpfs 5120 4 5116 1% /run/lock tmpfs 1964940 0 1964940 0% /sys/fs/cgroup tmpfs 1964940 4 1964936 1% /tmp tmpfs 392992 72 392920 1% /run/user/999 /dev/mmcblk0p1 31263744 2916608 28347136 10% /media/ubuntu/KARTA root@ubuntu:/home/ubuntu/Desktop/VW# cat /sys/block/mmcblk0/device/cid 1b534d3030303030105c4d5772010a01 root@ubuntu:/home/ubuntu/Desktop/VW# sudo ./mmc64 prog_cid /dev/mmcblk0 5d53424c32424d31013917ca53010400 Writing new CID. ioctl: Invalid argument root@ubuntu:/home/ubuntu/Desktop/VW# ubuntu@ubuntu:~/Desktop/VW$ sudo ./mmc64 prog_cid /dev/mmcblk0 5d53424c32424d31013917ca53010400 ioctl: Connection timed out Failed to enter vendor mode. Genuine Samsung Evo Plus? ubuntu@ubuntu:~/Desktop/VW$ RE: Update RNS315 Europe V8 EAST - tomek2k1 - 12-11-2016 Make sure, you're using Evo+ Card. Evo without + does not work. If you're using the right card, try another Evo + (10-11-2016, 16:42 PM)jokir Wrote: I acted according to the instructions |