ISTA-P Vehicle Order Problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: ISTA-P Vehicle Order Problem (/showthread.php?tid=19275) |
ISTA-P Vehicle Order Problem - semihmutcali - 04-11-2016 Hi everybody, when I want to use ista-p it want Vehicle Order. How can I generate this file ? I'm sorry for my bad English RE: ISTA-P Vehicle Order Problem - Loliceman - 04-11-2016 It depends on you model, F-series or E-Series. I had an issue a few days ago when I was helping a friend. He had an E60 and ISTA/P gave warnings for "faulty VO" or "cannot read VO from vehicle". I had to use NCSExpert and remove some old and faulty VO codes that was stored in car before i could use ISTA/P. RE: ISTA-P Vehicle Order Problem - jararak - 04-11-2016 Same with me on friend e92, someone plays before and randomly add some VO, with NCS I have to remove them, than it works like a charm. RE: ISTA-P Vehicle Order Problem - Loliceman - 04-11-2016 Yes previous owner should learn to code properly RE: ISTA-P Vehicle Order Problem - semihmutcali - 04-11-2016 How can I found original VO ? in F and E series ? or correct the wrong VO Thank you RE: ISTA-P Vehicle Order Problem - Almaretto - 04-11-2016 (04-11-2016, 19:17 PM)semihmutcali Wrote: How can I found original VO ? in F and E series ? or correct the wrong VO Thank you Run VIN Check. You can correct VO in either Notepad++, Word Pad, or E-sys FA-Editor for F-series. Not sure about E-series. RE: ISTA-P Vehicle Order Problem - DNK76 - 04-11-2016 Just decode vin in ETK Login to ASAP, There you have all the codes FA You can even explicitly load FA (E-series NCS) file SSD and save in two communication modules |