NBT EVO and TCB2 in Exx series coding problem - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40) +---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61) +---- Thread: NBT EVO and TCB2 in Exx series coding problem (/showthread.php?tid=19446) |
NBT EVO and TCB2 in Exx series coding problem - simplextibi - 11-11-2016 Hi I have on the desk a NBT evo connected by Ethernet to tcb2 and also nbt evo connected to ZGW i can see the nbt and the zgw in esys but tcb2 dies not show up on the ecu list what can i do to be able to code unit? RE: NBT EVO and TCB2 in Exx series coding problem - BMW_Fun - 11-11-2016 I have NBTEvo (ID4 ID5) on the desk + zgw (2008 reflashed to NBTevo) + ATM (TCB2) - all work fine RE: NBT EVO and TCB2 in Exx series coding problem - simplextibi - 12-11-2016 (11-11-2016, 18:12 PM)BMW_Fun Wrote: I have NBTEvo (ID4 ID5) on the desk + zgw (2008 reflashed to NBTevo) + ATM (TCB2) - all work fine I also have zgw on the desk what bootloader and software did you flash the zgw unit? how di you wire it? i wired odb-zgw-nbt evo 20pin connector and also from there the tcb2 through Ethernet is this ok? |