Iveco MS 6.3 - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310) +--- Forum: Automotive Workshop Manuals (https://cartechnology.co.uk/forumdisplay.php?fid=20) +--- Thread: Iveco MS 6.3 (/showthread.php?tid=19568) |
Iveco MS 6.3 - davor.touch - 15-11-2016 Hello, have anyone good and correct pinout for iveco 38pin cable ? i found at google but no one work , i would like conect delphi and iveco ecu have the MS6.3 thanks RE: Iveco MS 6.3 - Raidraid - 15-11-2016 (15-11-2016, 10:10 AM)davor.touch Wrote: Hello, RE: Iveco MS 6.3 - davor.touch - 16-11-2016 (15-11-2016, 10:34 AM)Raidraid Wrote:(15-11-2016, 10:10 AM)davor.touch Wrote: Hello, thanks i conect all like this and i buy new one cable and pinout is correct but still can't conect ecu and delphi ... i try at 2 iveco .... rest cars i working normal with delphi ... anyone maybe know what is the problem ? thanks advance RE: Iveco MS 6.3 - sisco - 16-11-2016 (15-11-2016, 10:10 AM)davor.touch Wrote: Hello, This should help RE: Iveco MS 6.3 - davor.touch - 17-11-2016 (16-11-2016, 21:25 PM)sisco Wrote:(15-11-2016, 10:10 AM)davor.touch Wrote: Hello, thanks for picture . but i conect like this and no work i check wires from conector of car to ecu and wires is OK , maybe ecu is problem ... ??? car starts OK , and working , only have some problem with regulator at pump... i think ... i'm not sure because i would like conect and heck faults davor RE: Iveco MS 6.3 - budjoni - 17-11-2016 Autocom = pin 38 2 = 2 = K-line 4-5 = 30 = Gnd. 16 = 27 = +12v Test & report! RE: Iveco MS 6.3 - davor.touch - 18-11-2016 (17-11-2016, 16:02 PM)budjoni Wrote: Autocom = pin 38 i will try and let you know works or not , maybe is problem ecu RE: Iveco MS 6.3 - test01 - 19-03-2024 hello, did you solve the connection problem? I have an iveco 2.8 78kw and the diagnostics do not work |