Proplem with Perkins 1300 EDI Series Engine - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: Car Technology Trucks / Heavy Vehicles Forum (https://cartechnology.co.uk/forumdisplay.php?fid=22) +--- Forum: Trucks / Heavy Vehicles Problems & General Discussions (https://cartechnology.co.uk/forumdisplay.php?fid=32) +--- Thread: Proplem with Perkins 1300 EDI Series Engine (/showthread.php?tid=19821) |
Proplem with Perkins 1300 EDI Series Engine - Mr.Jone - 26-11-2016 Hi to all. I have CAT Communication Adapter 3 and Perkins EST 2015A When i test Perkins 1300 EDI Series Engine. The Configuration Tool are disabled and Cylinder Cutout Test Does not exist in diagnostic test. In another engine every thing working well. How I can Enable configuration tool and Cylinder Cutout Test in Perkins 1300 EDI Engine? RE: Proplem with Perkins 1300 EDI Series Engine - MarianT - 09-12-2016 Hi, Is not possible to use EST more then you have on your screen. For this engine is necessary EDI 1300 software with same interface. RE: Proplem with Perkins 1300 EDI Series Engine - blh - 24-12-2016 (26-11-2016, 00:04 AM)Mr.Jone Wrote: Hi to all. Have you tried it with EDI 1300 series (26-11-2016, 00:04 AM)Mr.Jone Wrote: Hi to all. Have you tried it with EDI 1300 series |