CarTechnoloGY
Delco - TMS370 code - Theftlock - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: CARRADIO / NAVIGATION (https://cartechnology.co.uk/forumdisplay.php?fid=14)
+--- Thread: Delco - TMS370 code - Theftlock (/showthread.php?tid=19838)

Pages: 1 2 3


RE: Delco - TMS370 code - Theftlock - bogege - 26-11-2016

Yes my friend, I also see it but do not know whether it is right !!


RE: Delco - TMS370 code - Theftlock - Shooting - 26-11-2016

(26-11-2016, 20:16 PM)bogege Wrote:  Yes my friend, I also see it but do not know whether it is right !!

Code location for this model is correct... looks good wink

wbr


RE: Delco - TMS370 code - Theftlock - locarno - 26-11-2016

(26-11-2016, 19:33 PM)Shooting Wrote:  Code from dump is 1151

wbr

Don't work

I enter code, then click "Band" button and get message "Theft Lock". After 2-3 more attempts, get "Theft Lock Out".


RE: Delco - TMS370 code - Theftlock - Shooting - 26-11-2016

(26-11-2016, 20:46 PM)locarno Wrote:  
(26-11-2016, 19:33 PM)Shooting Wrote:  Code from dump is 1151

wbr

Don't work

I enter code, then click "Band" button and get message "Theft Lock". After 2-3 more attempts, get "Theft Lock Out".

Try reading the chip again..

wbr


RE: Delco - TMS370 code - Theftlock - locarno - 26-11-2016

(26-11-2016, 20:57 PM)Shooting Wrote:  
(26-11-2016, 20:46 PM)locarno Wrote:  
(26-11-2016, 19:33 PM)Shooting Wrote:  Code from dump is 1151

wbr

Don't work

I enter code, then click "Band" button and get message "Theft Lock". After 2-3 more attempts, get "Theft Lock Out".

Try reading the chip again..

wbr

Will, try and share but I don't think it change something.
At all which code is "correct" for this dump ? 2003/4550/1151 ?


RE: Delco - TMS370 code - Theftlock - Shooting - 26-11-2016

(26-11-2016, 21:01 PM)locarno Wrote:  
(26-11-2016, 20:57 PM)Shooting Wrote:  
(26-11-2016, 20:46 PM)locarno Wrote:  
(26-11-2016, 19:33 PM)Shooting Wrote:  Code from dump is 1151

wbr

Don't work

I enter code, then click "Band" button and get message "Theft Lock". After 2-3 more attempts, get "Theft Lock Out".

Try reading the chip again..

wbr

Will, try and share but I don't think it change something.
At all which code is "correct" for this dump ? 2003/4550/1151 ?

4550 is wrong 100%.. this is from wrong serial calc, this radio is Delco not Delphi.. different calc.
I do not know where 2003 came from, but 1151 was from dump and from correct code location for this model.
Is the radio in the car? .. is possible code is 0115 but unsure

wbr


RE: Delco - TMS370 code - Theftlock - locarno - 26-11-2016

Quote:4550 is wrong 100%.. this is from wrong serial calc, this radio is Delco not Delphi.. different calc.
I do not know where 2003 came from, but 1151 was from dump and from correct code location for this model.
Is the radio in the car? .. is possible code is 0115 but unsure

wbr

Radio not in car. I tried on bench. 0115 don't work too.
Maybe do you have dump with known code that I can write, to my unit ??


RE: Delco - TMS370 code - Theftlock - Shooting - 26-11-2016

(26-11-2016, 21:13 PM)locarno Wrote:  
Quote:4550 is wrong 100%.. this is from wrong serial calc, this radio is Delco not Delphi.. different calc.
I do not know where 2003 came from, but 1151 was from dump and from correct code location for this model.
Is the radio in the car? .. is possible code is 0115 but unsure

wbr

Radio not in car. I tried on bench. 0115 don't work too.
Maybe do you have dump with known code that I can write, to my unit ??

Try in the car with 1151

wbr


RE: Delco - TMS370 code - Theftlock - Raimaxs - 26-11-2016

Try 1510 .........


RE: Delco - TMS370 code - Theftlock - locarno - 29-11-2016

1510 Don't work too.

Shooting. Code 1151 don't work in car too.
But radio show this number when I hold 2 and 3 button at the same time:

[Image: 9160468600_1480451005.png]

I also tried to change some bytes in dump, but without success. Radio start without code after changes in memory dump.

Any other solutions to find correct code ?