+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: F10 SLI activation? (/showthread.php?tid=19865)
Pages:
1
2
F10 SLI activation? - Marteuk - 27-11-2016
Hello all. i have 2010 f11 with (s5aca) high beam assist, (s8tfa) Active pedestrian protection. This means kafas camera is in place and its kafas and not kafas2, so fsc not needed to activate as per forums.
I'm new to esys and when I click read svt, I don't see kafas.
my guess is I need to add it to VO. anyone can tell me how to add it and what code? also for UK car I would need to write?:
KAFAS 3030 IMPLICIT_SPEED_LIMITS_1 NAME_1 = 55,4b
KAFAS 3010 SLI_CODING COD_ELECTRICAL_HORIZON = aktiv
Can I also add lane departure at the same time, without button and without vibrating steering?
RE: F10 SLI activation? - Fx82 - 27-11-2016
Add 8TH to Vo and code.
I can do it remotely for you.
RE: F10 SLI activation? - Marteuk - 27-11-2016
(27-11-2016, 21:38 PM)Fx82 Wrote: Add 8TH to Vo and code.
I can do it remotely for you.
thanks for the code, I will try to do myself. just enabled acoustic confirmation for remote lock, so not bad start. is 8TH full code, or should be more letters?
RE: F10 SLI activation? - Fx82 - 27-11-2016
It is the full code.
RE: F10 SLI activation? - Marteuk - 28-11-2016
SO I ADDED 8TH, BUT WHEN I READ SVT KAFAS WON'T APPEAR ON ECU LIST.
RE: F10 SLI activation? - Fx82 - 28-11-2016
What happens when you click on "read ecu" ?
Could you send me the vin of the car?
RE: F10 SLI activation? - Marteuk - 28-11-2016
Just sent you pm
RE: F10 SLI activation? - Fx82 - 28-11-2016
Do you have the kafas ecu installed? It is located next to the zgw module.
If I check your vin connected to BMW AG I don't see a kafas ecu.
RE: F10 SLI activation? - Marteuk - 28-11-2016
(28-11-2016, 15:31 PM)Fx82 Wrote: Do you have the kafas ecu installed? It is located next to the zgw module.
If I check your vin connected to BMW AG I don't see a kafas ecu.
kafas, is the camera for high beam, and pedestrians? or i'm wrong?
RE: F10 SLI activation? - Fx82 - 28-11-2016
Kafas camera is for:
-high beam assist
-lane departure warning
-speed limit info
You don't have the pedestrian warning system only that the hood pops up.