+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: Discussions All about Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=310)
+--- Forum: Automotive Help & Discussions / Software and Hardware (https://cartechnology.co.uk/forumdisplay.php?fid=40)
+---- Forum: BMW - Mini - Rolls Royce (https://cartechnology.co.uk/forumdisplay.php?fid=61)
+---- Thread: Any way to get EVO with APIX2 from G to work with APIX1? (/showthread.php?tid=20016)
Any way to get EVO with APIX2 from G to work with APIX1? - 840i - 04-12-2016
Have a G series EVO here, has APIX1 and APIX2, APIX1 is for kombi if I am not mistaken and APIX2 for actual screen.
I changed the display settings to APIX 1 etc but not working, I went from NO SIGNAL to black screen.
Anyway to get this to work with APIX 1 screen or not?
Cheers
RE: Any way to get EVO with APIX2 from G to work with APIX1? - ruben_17non - 04-12-2016
Im 99% not possible by coding, you will need power regulator
RE: Any way to get EVO with APIX2 from G to work with APIX1? - FSCmap - 04-12-2016
G series EVO wouldn't work on bench with cas4+zgw or fem.
RE: Any way to get EVO with APIX2 from G to work with APIX1? - 840i - 04-12-2016
(04-12-2016, 12:17 PM)FSCmap Wrote: G series EVO wouldn't work on bench with cas4+zgw or fem.
So do you recon it will work if I use an emulator that handles G series or will not work at all?
Cheers
RE: Any way to get EVO with APIX2 from G to work with APIX1? - yoodog - 24-09-2017
Intersted actually! I install EVo with F10 and f15 screens all the time, and just recently figured that G30 body has issue like that! G11 body doesn't it seems!
So big UP to this thread!
----- my experience ------
after coding all parameters on G30 body screen gose completely off, I don't think even back light is on. Which leads me to the questions:
- is power out still the same after coding APIX1? (I have power leed seperate, and I think I disconnected apix while power was in, and it was still blank! Will test power out later my self)