CarTechnoloGY
5m48h cas4 xprog - Printable Version

+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9)
+--- Thread: 5m48h cas4 xprog (/showthread.php?tid=20394)

5m48h cas4 xprog - rs@chip - 21-12-2016

Hi c.t. people..hi is there any better pinout(without lifting pins) for read/write cas4 via xprog?here I have some from rosfar..and some find on net..can anyone confirm this working...thanks advanced

I also find mcu adapter for that mask..but I cant find where to buy it..here picture atached under

RE: 5m48h cas4 xprog - blokers77 - 21-12-2016

Hi mate, look at this under

RE: 5m48h cas4 xprog - rs@chip - 22-12-2016

(21-12-2016, 10:39 AM)blokers77 Wrote:  Hi mate, look at this under

those are from original manuals..with lifting pins..I find some time ago someone suces reading without lifting pins on mcu..but cant find anymore..

RE: 5m48h cas4 xprog - Vladislavy - 23-12-2016

(22-12-2016, 10:14 AM)alex.eobd2 Wrote:  
(21-12-2016, 10:39 AM)blokers77 Wrote:  Hi mate, look at this under

those are from original manuals..with lifting pins..I find some time ago someone suces reading without lifting pins on mcu..but cant find anymore..

Reads and writes, no problem.

RE: 5m48h cas4 xprog - rs@chip - 04-01-2017

I read it by upa-s..biggrin I was to scare do it with x-prog..now I like to make spare key , is it posible by tagkey tool fvdi?

RE: 5m48h cas4 xprog - pica14 - 05-01-2017

I have read and write cas4 whit xprog clone 5.51 and work perfect , i have read 5 units

RE: 5m48h cas4 xprog - rs@chip - 07-01-2017

(05-01-2017, 15:34 PM)pica14 Wrote:  I have read and write cas4 whit xprog clone 5.51 and work perfect , i have read 5 units

you made all units with lifting pins,or you try not to?

RE: 5m48h cas4 xprog - pica14 - 08-01-2017

(07-01-2017, 20:37 PM)alex.eobd2 Wrote:  
(05-01-2017, 15:34 PM)pica14 Wrote:  I have read and write cas4 whit xprog clone 5.51 and work perfect , i have read 5 units

you made all units with lifting pins,or you try not to?

yes i made unit whit lifting pins ,and it is very dangerous but it is solutions