What brand china tool is good for reading mcu - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: What brand china tool is good for reading mcu (/showthread.php?tid=20935) |
What brand china tool is good for reading mcu - chong5195 - 13-01-2017 Hi guy.. I just start to learning how to reading and programming mcu.. like Honda airbag module. ;, but i still don has reader mcu.. can tell me which brand and what model can read and write mcu .. because I need to buy which brand better in china tool ,, hi guy I waiting ur answer.. thankkkkk RE: What brand china tool is good for reading mcu - volavka - 13-01-2017 Xprog good to start RE: What brand china tool is good for reading mcu - panyauto - 13-01-2017 Correct Xprog M 5.0 very good to start up with RE: What brand china tool is good for reading mcu - raffy haddad - 14-01-2017 Hello with all my respect to all members and Masters in this job My advise to you as a beginer like me buy original with pictures How to connect in circuit reading And one programmer never enough I learned this here on this forum Thanks all RE: What brand china tool is good for reading mcu - fahmid hassan - 15-01-2017 (14-01-2017, 06:22 AM)raffy haddad Wrote: Hello with all my respect to all members andYes we need some easy programmer with briefly detailed information to begin with. Sent from my HUAWEI RIO-L01 using Tapatalk RE: What brand china tool is good for reading mcu - chong5195 - 15-01-2017 (13-01-2017, 17:49 PM)volavka Wrote: Xprog good to start xprog i has aready .. can ready mcu???.can ready without soldering ?? (13-01-2017, 18:04 PM)panyauto Wrote: Correct Xprog M 5.0 very good to start up with how to read using xprog to read mcu .. without soldering out the mcu?? |