+- CarTechnoloGY (https://cartechnology.co.uk)
+-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3)
+--- Forum: DASHBOARD (https://cartechnology.co.uk/forumdisplay.php?fid=10)
+--- Thread: How program bsi. double sided (/showthread.php?tid=20966)
How program bsi. double sided - pietje001 - 14-01-2017
Hi guys.
most bsi's from french cars are double sided.
when the chip is on the inside, most people use the connections of the outside of the board.
but i'm going to do a ds4.. and dont have connection scheme.
can i cut the pins on the side, program the chip, and resolder the pins on the side to restore?
thhx
RE: How program bsi. double sided - welsh - 14-01-2017
Hello. would not recommend cutting them when can spend time removing solder. we have done this before, but solder is a pig. good cleaning, flux and solder suction does the trick with reasonably high temp on iron.
I would suggest first removing BSI, take photos, sealed and opened. full vehicle info.
Post pictures here, and see if anyone can share pinouts with you with out having to split the pins.