Astra G IMMO connection diagram for PIN - Printable Version +- CarTechnoloGY (https://cartechnology.co.uk) +-- Forum: All About IMMO/ECU , ChiPTuninG , Dashboard , Locksmith , AirbaG , Carradio (https://cartechnology.co.uk/forumdisplay.php?fid=3) +--- Forum: IMMO & LOCKSMITH (https://cartechnology.co.uk/forumdisplay.php?fid=9) +--- Thread: Astra G IMMO connection diagram for PIN (/showthread.php?tid=21002)

Astra G IMMO connection diagram for PIN - sparky001 - 16-01-2017 Heya all I have a 2001 Astra G Z18XE. Has had a Engine swap. Neither of the PIN codes I pull out of each Eng ECU is accepted by the IMMO How do I connect to the IMMO??? Have got VVDI prog Cheers RE: Astra G IMMO connection diagram for PIN - volavka - 16-01-2017 Xprog werk well , you need to remove tms mcu and put in adapter good luck RE: Astra G IMMO connection diagram for PIN - nikosmb - 16-01-2017 Https://www.youtube.com/watch?v=3BjB9OO2GWY RE: Astra G IMMO connection diagram for PIN - strikeforce - 16-01-2017 You can also check this https://m.youtube.com/watch?v=KfB8BORcfWs&itct=CA4QpDAYBCITCJ3vjrKbx9ECFUdkFgod5FsN4jIHcmVsYXRlZEjmstidzr6wjNwB RE: Astra G IMMO connection diagram for PIN - dil6222 - 19-01-2017 UPA will also do the trick RE: Astra G IMMO connection diagram for PIN - sparky001 - 17-02-2017 Heya all I finally got around to reading TMS MCU, not sure if I had X Prog on the right TMS setting I got PIN 2051 Can some one please confirm Cheers And what temp should I have re work at?? RE: Astra G IMMO connection diagram for PIN - daniersms - 17-02-2017 2051 is correct